Haynes Forums  

Go Back   Haynes Forums > Haynes Roadster Forums > Electrics
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 20th April 2012, 12:05 AM
ken ken is offline
Junior Member
 
Join Date: Apr 2012
Posts: 1
Default XJ12 temp gauge with pinto water temp sender

Hi,

I liberated nice temperature and fuel gauges from a scrapped Jag XJ12. Any ideas how to hook up to temp gauge to the temperature sender.

I've experimented with a couple of configurations, but I either get no movement or the needle goes over to the far right.

Do I need to put in a resistor or something? Or can I get a sender which will "drive" this gauge correctly?

If it helps, the brass spade connector has at '+' symbol embossed on the plastic beside it.

Images below...

http://www.flickr.com/photos/kenpower/7093496169/


http://www.flickr.com/photos/kenpower/7093495933/


I have (unscientifically) recorded the response from the pinto water temp sender. The results on a google chart are here.

https://docs.google.com/spreadsheet/...lX3E4Y3dVQ lE

This might help someone figure out how I should connect the gauge.
Reply With Quote
  #2  
Old 20th April 2012, 08:52 AM
robo robo is offline
Senior Member
 
Join Date: Jun 2011
Location: scabs
Posts: 1,722
Default

I used these gauges in a cobra kit that i built and i had the same grief. I have got a series jag manual here and all it shows is a live to the plus and the other wire to the sender unit. I had to get the sender unit from a Jag and re tap the hole in the yank engine to take it. The rev counter is fun and games as well, to get that to work we had to get a pulse wire from the alternator and adjust the trim screw on the gauge to calibrate , the speedo worked off a transducer so that was a ball ache too. Got round it all in the end but those budget gauges you see on ebay did look attractive in the end.

Bob
__________________
When The Results Disagree With The Theory: Believe The Results And Invent A New Theory
If I had two brains I,d still be a halfwit

The cave http://s1116.photobucket.com/user/my...deshow/mancave

The build http://www.haynes.co.uk/forums/showthread.php?t=12669
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 07:57 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.