#11
|
||||
|
||||
I stitch welded mine James
Welded 1/2" missed 1" on the outside, on the inside I put in 1/2" stitches in the midde of the 1" gap. It will probably warp like hell if fully welded I used a piece of 1.6mm sheet for mine, mainly because that's what I had here in stock .
__________________
I am not a complete idiot...........Some of the parts are missing !! Ronnie www.roadster-builders.co.uk |
#12
|
||||
|
||||
i welded the plate on the side then just tacked it bit by bit worked a treat. think there are some pictures of doing it in my photo bucket somewhere
i boxed mine in both sides as it meant one less bit to edge trim for iva
__________________
My Roadster Is Finished NerNer....... Pigs can fly, you just have to carry them onto the plane. My Pictures http://s707.photobucket.com/user/ashgardiner/profile/ Last edited by AshG : 9th May 2010 at 10:18 PM. |
#13
|
||||
|
||||
what thickness cp11 did you use ash?
|
#14
|
|||
|
|||
book says cp11 to be 1mm plate ?
can anyone confirm this cheers
__________________
theres a box ! im not allowed in it ! i have to think outside ! |
#15
|
||||
|
||||
Quote:
cheers andy
__________________
Flat Pack Chassis Kits for sale, contact me at andyroadster@yahoo.co.uk |
#16
|
|||
|
|||
you sir are a star ! i was planning to cut them in the week shant bother now
__________________
theres a box ! im not allowed in it ! i have to think outside ! |
#17
|
||||
|
||||
Quote:
I think you are going to have your hands full this coming week, cheers andy
__________________
Flat Pack Chassis Kits for sale, contact me at andyroadster@yahoo.co.uk |
Thread Tools | |
Display Modes | |
|
|