#11
|
||||
|
||||
Yep, good progress..
And I will be on for Blast #2 in a few weeks TT
__________________
You only get a woosh with a dump valve Build Thread Man Cave Mantiques Cecil Street Auto Repairs Garage Carlisle Build Cost £4181.65 - Last - Wheel Cylinders |
#12
|
||||
|
||||
iv drilled a 4mm hole to pass the cable through the top rail into the headlamp brackets. i was just going to cut them midway and remove a section of the oval tube then reweld rather than tryng to cut near the chassis( knowing my luck id cut through the top rail!). If i do this will they cause clearance isues later on?
thanks nathan |
#13
|
|||
|
|||
Just cut them very near the top rail if you are worried about cutting into it then dress it back flush with a flap disc
Shorten them and weld them back on, it will save mucking about trying to cut them in the middle, shorten them and weld them back together again neatly. |
#14
|
||||
|
||||
I thought the brackets looked too long too, but assumed I must have done it wrong..
Phew! TT
__________________
You only get a woosh with a dump valve Build Thread Man Cave Mantiques Cecil Street Auto Repairs Garage Carlisle Build Cost £4181.65 - Last - Wheel Cylinders |
Thread Tools | |
Display Modes | |
|
|