#1
|
|||
|
|||
Counter Sunk Pop Rivets for Floor
Going to put my ali floor in hopefully this weekend.
I'm sure I read the sides should use counter sunk pop rivets to give clearance for the side panels, what rivets have people used? and what countersink tool? Cheers Mike
__________________
Build Cost so far £xxx (Given up adding it up) - She Starts!! Build Thread Here: http://www.haynes.co.uk/forums/showthread.php?t=5501 |
#2
|
||||
|
||||
good question, also i'm guessing the rivets have to be sealed rivets or do youuse normal ones and put some silicone in the holes??
Dean
__________________
My Blog: deannoshaynesroadster.wordpress.com (under construction) Being overtaken is a sign of weakness. South Wales Kit Car Club www.southwaleskitcarclub.co.uk WWW.HELPFORHEROES.ORG.UK XBox Gamer tag: D34NNO |
#3
|
|||
|
|||
Get the rivets from a decent nut and bolt shop and ask them where the price break is on quantities . Some times you you get 500 for the same price as 250 as an example. If you are doing a lot invest in a drill and countersink as one unit.
http://cajero.co.uk/countersinks.htm Bob
__________________
When The Results Disagree With The Theory: Believe The Results And Invent A New Theory If I had two brains I,d still be a halfwit The cave http://s1116.photobucket.com/user/my...deshow/mancave The build http://www.haynes.co.uk/forums/showthread.php?t=12669 |
#4
|
|||
|
|||
when I bought some rivets I found that screwfix were really cheap for 500+
|
#5
|
|||
|
|||
Can't find any countersunk rivets in screwfix?
__________________
Build Cost so far £xxx (Given up adding it up) - She Starts!! Build Thread Here: http://www.haynes.co.uk/forums/showthread.php?t=5501 |
#6
|
|||
|
|||
a good deburing bit makes a great countersink in the drill
a large drill is useless as it has 2 cutting points and will make triangle shape countersinks |
Thread Tools | |
Display Modes | |
|
|