Haynes Forums  

Go Back   Haynes Forums > Haynes Roadster Forums > Chassis
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #31  
Old 3rd February 2011, 10:58 AM
fabbyglass
 
Posts: n/a
Default

It doesn't have to be exactly to the book, there are other ways to make it without the compound angles as long as it's up the job...a simple loop in round tube like the rear boot section does the trick....
Reply With Quote
  #32  
Old 3rd February 2011, 09:50 PM
brainbug007's Avatar
brainbug007 brainbug007 is offline
Senior Member
 
Join Date: Nov 2010
Location: Weston-Super-Mare
Posts: 846
Default

I ended up tacking sw3 to the tranny tunnel then tack sw2 onto sw3 rather than assemble sw1-3 flat on the board then try to fit. It worked much better as it let me make sw1 to fit which ended up being about 10mm longer than the book spec and still maintain the 71 degree angle on both sw1 and sw3. Hardly had to file the compound angle on sw1 this way as well
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 10:30 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.