|
#1
|
||||
|
||||
Coil pack
Yet another daft question,
have the edis set up and coil pack mounted to the back of the engine. Whats the correct order to the plugs from the coil pack. The coil electrical connector is pointing towards the scuttle? |
#2
|
|||
|
|||
The numbers are on the coil next to the sockets, might need cleaning up a bit to see them? Dennis
|
#3
|
||||
|
||||
Cheers fellas,
not far off from trying to start it, so thought i'd ask. Can't remember seeing any identifying marks - I'll have another look. Lets hope the leads reach????? Thanks again. |
#4
|
||||
|
||||
Hi Daz
Just been out to look for one for a photoshoot ..... Too dark to find em It may help to point out, the coil pack is arranged in two Banks A & B 1 & 4 are on one bank 2 & 3 are on the other bank When the the ignition module fires the coil, either bank A or bank B is fired meaning that 2 plugs are fired at the same time ( Hence the term wasted spark ) From memory. Adrians post is spot on I'll take a picky for you tomorrow
__________________
I am not a complete idiot...........Some of the parts are missing !! Ronnie www.roadster-builders.co.uk |
#5
|
||||
|
||||
clean the dirt off between the plugs there are clearly marked numbers
|
#6
|
||||
|
||||
Quote:
amazing what you find if u look, didn't even have to clean anything. It was already clean, and there it was clear as daylight - never noticed it before. Now i know the firing order, all leads fit except one - the longest?? Do they do longer leads or am I going to have to move the coil pack??????? |
Thread Tools | |
Display Modes | |
|
|