|
#1
|
||||
|
||||
Redesigned steering rack support assembly
Hello everybody,
Yesterday, I fitted the steering rack support on my chassis. As I'm very happy with it, I wanted to share the pics with you. I ordered the assembly to Madis (on this forum) among other chassis plates. Madis redesigned this steering rack support in a stronger assembly, and I think the result is great. IMG_8175_1.JPG IMG_8176_1.JPG IMG_8178_1.JPG IMG_8177_1.JPG |
#2
|
||||
|
||||
That looks neat, is it to the correct version f the dimensions?
It's good that people are re-engineeering parts to make them better. And make building easier. TT
__________________
You only get a woosh with a dump valve Build Thread Man Cave Mantiques Cecil Street Auto Repairs Garage Carlisle Build Cost £4181.65 - Last - Wheel Cylinders |
#3
|
||||
|
||||
Yes exactly the same dimensions. Just the supporting plane is 2mm lower than in the book to allow tolerence for fine tuning of the steering reck height (and eliminate bump steer). This means that if anything is correct then there needs to be just 2 mm strips under the steering rack clamps. But if needed then you can lower the st rack.
Thank you for the comment |
#4
|
|||
|
|||
Here are the manufacturing drawings and profile files for cutting http://dl.dropbox.com/u/23250457/Mod...0st%20rack.zip. If any questions arise please send an e-mail.
Madis |
#5
|
|||
|
|||
Is anybody set up to manufacture these Plates?
|
#6
|
|||
|
|||
I have this setup for my own build and I supplied the kit to voucht.
Any UK based manufacturer is welcome to supply this design as they reference to author and this forum. Madis |
Thread Tools | |
Display Modes | |
|
|