Haynes Forums  

Go Back   Haynes Forums > Haynes Roadster Forums > General discussion
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #111  
Old 24th January 2015, 09:45 PM
SeriesLandy's Avatar
SeriesLandy SeriesLandy is offline
Senior Member
 
Join Date: Nov 2008
Location: Portsmouth
Posts: 828
Default

You don't have to have a steering lock for IVA but you do need 2 forms of security. Just fit a key/ keyless ignition and an immobliser. That's why the ignition barrel and steering lock was handy.
__________________
Steve
My Photo Album | Haynes Roadster FAQ | IVA Forms How To
Reply With Quote
  #112  
Old 24th January 2015, 10:19 PM
Rosco Rosco is offline
Senior Member
 
Join Date: Sep 2014
Posts: 493
Default

Quote:
Originally Posted by rpjg1975 View Post
Looking good there, sure someone will come back with a bright idea about the harnesses......I may well be wrong but I was under the impression that the steering lock was one of the things required for iva?

Russ
Quote:
Originally Posted by SeriesLandy View Post
You don't have to have a steering lock for IVA but you do need 2 forms of security. Just fit a key/ keyless ignition and an immobliser. That's why the ignition barrel and steering lock was handy.
Yeah you can use the steering lock as one of the two but then I would have to uses the sierra ignition switch, and I've got to use the bike ignition because of the immobiliser in the key, I'm hoping that will count as two but if not I will get a key fob too
Reply With Quote
  #113  
Old 25th January 2015, 12:52 AM
rpjg1975 rpjg1975 is offline
Senior Member
 
Join Date: Jun 2009
Location: School Aycliffe, County Durham
Posts: 556
Default

Ah cool, that's good then
Reply With Quote
  #114  
Old 30th January 2015, 08:48 PM
Rosco Rosco is offline
Senior Member
 
Join Date: Sep 2014
Posts: 493
Default

Got a bit done this week,

Cut the lock etc off and made a stainless tube, still need to secure it



Also made some top hat washers for the column bracket



Got my plates for the footwell back from my fabricators



Reply With Quote
  #115  
Old 30th January 2015, 08:49 PM
Rosco Rosco is offline
Senior Member
 
Join Date: Sep 2014
Posts: 493
Default

I've had these cut out of 2mm and a strengthening fold along the bottom where the pedal box bolts in





Also got a couple of front seat rails bent up, these will have nuts welded underneath



And sit somewhere like this, pedal box is next weeks job so then I can work out my seat position

Reply With Quote
  #116  
Old 30th January 2015, 08:49 PM
Rosco Rosco is offline
Senior Member
 
Join Date: Sep 2014
Posts: 493
Default

Picked up a cat today to, it's a 400 cel custom chrome one, there only down the road from me, could of got a 200 cell high flow but didn't want any problem getting through my iva



Reply With Quote
  #117  
Old 31st January 2015, 08:07 PM
NeilW NeilW is offline
Senior Member
 
Join Date: Jun 2014
Location: Sunderland, Tyne and Wear
Posts: 224
Default

Great build so far mate, nice clean look. Good motivation for me to pull my finger out
Reply With Quote
  #118  
Old 1st February 2015, 08:29 PM
Rosco Rosco is offline
Senior Member
 
Join Date: Sep 2014
Posts: 493
Default

Quote:
Originally Posted by NeilW View Post
Great build so far mate, nice clean look. Good motivation for me to pull my finger out
Cheers, yeah get cracking!
Reply With Quote
  #119  
Old 1st February 2015, 08:30 PM
Rosco Rosco is offline
Senior Member
 
Join Date: Sep 2014
Posts: 493
Default

Down my dads all day today, he's built a cnc router, works like a dream

Made a flange for my zx10 fuel pump today, this will be welded to a tube then to the bottom of the tank to make a swirl/ sump

Made a ply one first to check holes and oring grove







10mm Ali plate

Reply With Quote
  #120  
Old 1st February 2015, 08:31 PM
Rosco Rosco is offline
Senior Member
 
Join Date: Sep 2014
Posts: 493
Default



Took 25mins to cut this out



Then made a wheel with the correct offset so I can check clearance when we make the exhaust manifold

One side is a 205 tyre the other is a 185 tyre

12mins for this I think, it flys through timber!



Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 09:21 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.