Electrical connection of new gauges

[HandyAndy]

Originally Posted by twinturbo

temperature one should have a solid probe, preasure should have a small hole.

TT

thats what I have, the temp one is like a small bullet, the pressure sender is a screw in thread with a tiny hole in the end, on the outside of the sandwich plate the pressure sender has a large body (size of the actual gauge) with the electrical screw on connector on it.

I,ll check the wiring from each sender tomorrow, if they are wired correctly then maybe its what "Mark" has suggested.

One of my winter mods will be a full new dash with these gauges & a bright 6 warning light setup & rev counter & speedo

cheers
andy