Haynes Forums  

Go Back   Haynes Forums > Haynes Roadster Forums > Electrics
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 20th May 2011, 08:50 PM
Andy_B Andy_B is offline
Senior Member
 
Join Date: Oct 2010
Location: Strathclyde
Posts: 274
Default TWIN !! Dohc Pin out

TT sure i have read a post somewhere about where the switched ignition feed goes to on the DOHC ECU but cant find it also how to get around the "start inhibit"...could you or anybody else that knows ...let me !! cheers
Reply With Quote
  #2  
Old 20th May 2011, 09:59 PM
Enoch Enoch is offline
Senior Member
 
Join Date: Nov 2009
Location: Near Boston, Lincolnshire
Posts: 788
Default

There is a start inhibit at pin 30 it's a brown / white wire. The 12 volt in is black, it goes to pins 37 and 57. That wire comes from the relay XI. From memory there is a wire that came from the alarm system that is not very well documented. If you have the Haynes manual it shows teh wire going off to the page where the alarm circuits are shown. I have the pin out list for the ECU if you need it.
Dave.
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 12:45 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.