#1
|
|||
|
|||
Mx5 Build Transmission Tunnel
I’m currently working on the transmission tunnel on my mx5 based build from the Saturn guide.
I can’t seem to fathom how the new cut pieces go together. So far i have welded in both TT1's (2 part) to the new amendments TT2 & TT3 TT4, TT5 & TT6 (the mitred hoop) TT9 & TT11 I’m stuck on TT6 & TT7 Am i correct in thinking that viewed from above the modified TT7's follow the line of the new TT1's but rise up to meet SB3? And that the TT6’s will need mitred to suit and TT8 should be cut to fit between the TT7’s. I was late last night when looking at this so I have probably missed something glaringly obvious that explains it all.I gave up in the end and decided to replace the liner in my welder instead of continuing. Wish I had never touched it. I ended up having to dismantle the gun and part of the machine and the new liner didn’t even fit. 2 hours later i was no better off than when i started. Thanks Andy
__________________
http://bamaroadster.blogspot.com/ |
Thread Tools | |
Display Modes | |
|
|