Haynes Forums  

Go Back   Haynes Forums > Haynes Roadster Forums > Bodywork and interior
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 4th July 2017, 12:45 PM
rincewind23 rincewind23 is offline
Junior Member
 
Join Date: May 2010
Posts: 20
Default 4 point harness lower mounts

Hi all,

I've bought some Titon 4-point harnesses - the top mounts are simple enough, 10mm I/D tube welded through a crossbar on the roll hoop, but I'm not sure how to connect the lower mounts - similar tube through the box steel of the chassis, or tabs (of thick steel) welded to the frame? I've searched the forums with no luck, and the SVA book is pretty vague (either that or I'm not reading it right).

Has anyone used 4-point harnesses before?

Cheers,
Kev.
Reply With Quote
  #2  
Old 4th July 2017, 02:41 PM
garyt garyt is offline
Senior Member
 
Join Date: Jun 2014
Location: Dufftown, scotland
Posts: 480
Default

Hi yes most folk use 4 point harness the mounts are shown in the book
These are shown as a flat plate with a threaded boss seam welded on the reverse, However my iva inspector said that they would have been better with a 90 deg return at each end to give better support, these are then welded onto the top of the frame flush with the cockpit side of the tube
Huh gary
__________________
remember we are not mad just creatively insane
Reply With Quote
  #3  
Old 4th July 2017, 03:19 PM
rincewind23 rincewind23 is offline
Junior Member
 
Join Date: May 2010
Posts: 20
Default

I am such a div, when I went back to look at the book they were quite obvious!

When you say a 90 degree return at each end, do you mean something like this?

https://ibb.co/i3BPLF (for some reason when I put the link in as 'add image', it doesn't display)
Reply With Quote
  #4  
Old 5th July 2017, 01:05 PM
garyt garyt is offline
Senior Member
 
Join Date: Jun 2014
Location: Dufftown, scotland
Posts: 480
Default

Yes just like that
__________________
remember we are not mad just creatively insane
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 05:40 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.