#1
|
||||
|
||||
2 quick questions
Hi guys. Haven't done much on my build for a few days because i'm waiting for bits.
Just been plannning wiring, anyone know how close to the fuel pipes i'm allowed to run the cables, is there a minimum distance? Also, i've been having a nightmare trying to shorten my sump - I've cut it, welded a plate on but there's a little bit that goes damp when i fill it with water. No matter how many times i grind it back and re-weld, it still goes damp when filled with water. (doesn't actually drip). If i run a bead of tigerseal or silicone on the inside, will this do anything to the oil? If so, does anyone know of a shortend zetec or cvh sump for sale anywhere? Needs to be about 6" top to bottom. Thanks all Dave
__________________
~ My Build Diary - http://davesroadster.blogspot.com/ *updated 7/6/11* Best bit so far: Getting it running Worst bit so far: Cutting steel for wishbones and engine mounts. Most annoying bit so far: Generator packing up half way through welding. |
Thread Tools | |
Display Modes | |
|
|