|
#1
|
||||
|
||||
If your going to use mx5 bits you will need a different bearing btw.
For the sierra shaft you will also need part of the original bearing. (It's all in the guide) For the cables, about 2-3mm slits just enough to get the cable through. |
#2
|
|||
|
|||
Quote:
On another note on the pedal box what are the v cuts for on the foreword stops and also the book says you need 8 shock brackets but two are fixed to the uprights Am I missing something? |
#3
|
||||
|
||||
I've no idea what the cutouts are for. There are better designs for a box on the forum.
Sus brackets, I count 6 too. No idea where 8 comes from. |
#4
|
|||
|
|||
Haha ok cheers, thought i was loosing it
|
#5
|
||||
|
||||
Found the pedal box here
Btw not every thing in the 'book' actually works. Like using the stock engine arms, the steering shaft goes through the top of the rubber mount. Also I was at your stage 5 years ago so I may be wrong on the suspension brackets but I don't think so. |
#6
|
|||
|
|||
|
#7
|
|||
|
|||
|
#8
|
|||
|
|||
|
Thread Tools | |
Display Modes | |
|
|