|
|
#131
7th September 2015, 10:38 AM
|
||||
|
||||
I had a proportioning valve from a Fiat Uno. They asked me what it was and I explained. It isn't adjustable (in stock form) so it passed.
I do seem to recall that bias bars must be locked and non adjustable too, nuts welded after adjustment for example but I didn't have one. Cheers Stot
__________________
1.6 Mazda B6 : Garrett TBO339 : 420cc WRX Injectors : FMIC : Microsquirt V3 : LC-2 Wideband : Toyota COP : 1.8 ATB LSD Build Started Jan 2013 : OTR Aug 2014 : Still OTR June 2024 
|
|
#133
7th September 2015, 09:05 PM
|
|||
|
|||
|
I've drilled it so can lock wire it into place
__________________
Build Cost so far £xxx (Given up adding it up) - She Starts!! Build Thread Here: http://www.haynes.co.uk/forums/showthread.php?t=5501
|
|
#134
7th February 2018, 01:08 PM
|
|||
|
|||
|
Well I haven't written here in ages.
Mine is nearly done and I've just applied for IVA before the new emission regulations come in. So hopefully be heading down to leighton buzzard VOSA sometime in March.
__________________
Build Cost so far £xxx (Given up adding it up) - She Starts!! Build Thread Here: http://www.haynes.co.uk/forums/showthread.php?t=5501
|
|
#136
7th April 2018, 07:07 AM
|
|||
|
|||
|
It went for Iva last week.
Minor fail main ones were fog light coming on with side light and not f marked, they want some strengthening of top seat belt mounts that were made to book spec. Not bad retest booked for first week in may,
__________________
Build Cost so far £xxx (Given up adding it up) - She Starts!! Build Thread Here: http://www.haynes.co.uk/forums/showthread.php?t=5501
|
|
#137
7th April 2018, 05:36 PM
|
||||
|
||||
|
Nice easy fixes then, ready for the summer...
Oh wait,,, the 1st week in may is the summer. 
__________________
You only get a woosh with a dump valve Build Thread Man Cave Mantiques Cecil Street Auto Repairs Garage Carlisle Build Cost £4181.65 - Last - Wheel Cylinders
|
|
#138
9th April 2018, 10:23 AM
|
|||
|
|||
|
Assuming it passes I'll then have to wait for registration documents I'm guessing 3 weeks min?
__________________
Build Cost so far £xxx (Given up adding it up) - She Starts!! Build Thread Here: http://www.haynes.co.uk/forums/showthread.php?t=5501
|
|
#139
9th April 2018, 06:47 PM
|
||||
|
||||
|
I thought "Technically" you can drive it without the Registration Document. How you do this with no plates I have no idea. Or it may be an out of date thing now.
__________________
You only get a woosh with a dump valve Build Thread Man Cave Mantiques Cecil Street Auto Repairs Garage Carlisle Build Cost £4181.65 - Last - Wheel Cylinders
|
|
#140
10th April 2018, 08:30 AM
|
|||
|
|||
|
You will not be able to drive without tax registration and insurance after an IVA pass so that would not be a goer. Insurance companies will cover you on a chassis number but only to and from IVA as well.
My car took 11 days from IVA to being registered and would have been quicker if I had had everything ready to go as soon as the pass certificate was in my hand. It was on the 11th day that I rang DVLA and spoke to Danielle Dymond who said, 'No problem , I'll find your file out and sort it out myself'. She did and emailed me the form at 4pm which allowed me to get number plates made up and on the road that day. Unlike some others I have always found DVLA very helpful if they can be. Good luck with yours
__________________
My build blog here http://ianhaynes20.wordpress.com
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
