|
|
#1
18th October 2010, 06:27 PM
|
||||
|
||||
Some progress at last!
Well, started back at work last week, so things can continue on the build. Today was a great milestone for me - Got the engine running!
Think it may be only running on 3 cylinders, but its hard to tell with a loose exhaust manifold and whilst keeping the engine running with the throttle (needs fully mapping still). But atleast it runs which is a start!  Video http://www.youtube.com/watch?v=oMx_HFOFP8M
__________________
~ My Build Diary - http://davesroadster.blogspot.com/ *updated 7/6/11* Best bit so far: Getting it running Worst bit so far: Cutting steel for wishbones and engine mounts. Most annoying bit so far: Generator packing up half way through welding. Last edited by David_17 : 18th October 2010 at 06:37 PM. 
|
|
#3
18th October 2010, 07:10 PM
|
|||
|
|||
|
I'd say it was running on 3 or maybe 2 lol. congratulations though, all down hill now
|
|
#4
18th October 2010, 07:27 PM
|
||||
|
||||
|
Cheers guys.
Forgot to mention, i have an inline fuse holder going to the middle wire of the coil, which keeps blowing (5 amp fuses). Any ideas why? Something to do with the missfire?? (i took it out in the end as i only had 2 fuses)
__________________
~ My Build Diary - http://davesroadster.blogspot.com/ *updated 7/6/11* Best bit so far: Getting it running Worst bit so far: Cutting steel for wishbones and engine mounts. Most annoying bit so far: Generator packing up half way through welding.
|
|
#7
18th October 2010, 08:33 PM
|
||||
|
||||
|
Thanks guys, what's the first things i should check to get all 4 cylinders firing? Any tips?
(forgot to add, it's running throttle bodies and MS1)
__________________
~ My Build Diary - http://davesroadster.blogspot.com/ *updated 7/6/11* Best bit so far: Getting it running Worst bit so far: Cutting steel for wishbones and engine mounts. Most annoying bit so far: Generator packing up half way through welding.
|
|
#8
18th October 2010, 08:33 PM
|
||||
|
||||
 i've got a long way to goKeep up the good work bud 
|
|
#9
18th October 2010, 09:16 PM
|
||||
|
||||
Well done
Well done David, that is a huge milestone to reach
 You have certainly come a very long way in a short space of time. Apart from checking all of the wiring connections & plug leads, perhaps you will be able to find someone willing to share a basic map for your MS1  Sure you'll soon get it running spot on
__________________
I am not a complete idiot...........Some of the parts are missing !! Ronnie www.roadster-builders.co.uk
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
