|
#1
|
||||
|
||||
3m dinoc
Hi guys,
had the afternoon off work today, i was under orders to do some decorating but i got bored so decided to finally have a play with some dinoc vinyl i bought ages ago. Iv been a bit scared of cocking it up as its so expensive, hence why its been in the cupboard for ages, but anythings better than rubbing down skirting boards so i thought id have ago at the flyscreen to break myself in gently. I was intending to wrap the rear tub and side panels, but it may end up looking a bit drab, what do you think? Turned out pretty good, a lot easier than i thought it would be, a bit time consuming mind.Its a bugger for fingerprint marks though. I did lose track of the time and ended up in trouble with the missus but hey ho.... macdonalds for me tonight
__________________
A few build photos... www.photobucket.com/ntsengineering |
#2
|
|||
|
|||
Good job, Like it. It seems great results can be achieved with the 3M products with a bit of time and patience.
|
#3
|
|||
|
|||
I did my rear panel and sides, pretty happy with the results
Cheers Adrian |
#4
|
|||
|
|||
very nice, i like the sides.
|
#5
|
||||
|
||||
cool, maybe il do it then!
__________________
A few build photos... www.photobucket.com/ntsengineering |
#6
|
|||
|
|||
It was easy enough to do, the hardest part was doing the long side panels by myself. If you've got enough, you can get carried away like I did and do the tunnel top, wing mirrors, bonnet stripes and anything else I could think of. Actually I'm thinking of ditching the bonnet stripes, as it was really hard to get it looking straight over the bonnet bulge, and it's the only part I thought looked pants after I'd done it! Other than that, I have. Othing but praise for the stuff!
Cheers Adrian |
Thread Tools | |
Display Modes | |
|
|