|
|
|
|
#1
12th April 2012, 10:39 PM
|
|||
|
|||
advice needed
Some advice needed regarding the electrics if at all pos, my loom for my 1.8 cvh was a mess so trying to go it alone. Does anyone know via a diagram or a description in laymans terms how to connect up the lambda sensor and coil via a switched earth to get her to fire. Any help would be really appreciated many thanks in advance?
__________________
Richard Just keep going we will get there in the end. 
|
|
#2
12th April 2012, 11:02 PM
|
|||
|
|||
|
|
|
#3
13th April 2012, 12:00 AM
|
|||
|
|||
|
re
Very kind thankyou but my loom isn't in the best of nick so not really an option was wanting to try to creat the switched earth manually if possible.
__________________
Richard Just keep going we will get there in the end.
|
|
#4
13th April 2012, 08:40 AM
|
||||
|
||||
|
Do you really need the lambda sensor connected to get it to fire? Sounds like you most likely have the same loom as me so have a look through some of the electrics threads that I've started when I was trying to get mine going.
|
|
#5
13th April 2012, 10:49 AM
|
|||
|
|||
|
thanks
Cheers will have a look at thread but was under the impression that the lambda sensor controlled the switched earthing of the charging and releasing of the coils energy.
__________________
Richard Just keep going we will get there in the end.
|
|
#6
13th April 2012, 12:25 PM
|
||||
|
||||
|
I'm not sure on that one but I managed to start & run mine up with just the edis in limp home mode without the ecu or any of it's sensor connected.
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
