#1
|
|||
|
|||
sierra wire colours
has any one got a list of what what wires does what for the sierra dont want to rid the wrong ones
|
#2
|
||||
|
||||
I would surgest that you buy the haynes manual for the sierra, it will give you a specific wiring diagram for your particular model as they all differ slightly.
Other than that someone may have the codes you are looking for. |
#3
|
|||
|
|||
I believe I have wiring diagrams for the Sierra. What year and model?
J |
#4
|
|||
|
|||
mine is a k
|
#5
|
|||
|
|||
Aaron,
Sorry in N. Ireland a K means nothing!! I'll try and send you the complete file. J |
#6
|
|||
|
|||
Oooops, files to big you'll need to send me your email address.
J |
#7
|
|||
|
|||
sorry didnt relise it is a 1993 modle
|
#8
|
||||
|
||||
aaron i have the sierra manual i can photocopy the pages you need, if you want to come and pick them up.
|
#9
|
|||
|
|||
thanks for your help every one i have got a manual just wondered if any one had a list of what wires did what.. so i chose to strip from fuse box taking out wire functions that i did not require any more e.g. central locking, alarm, acc, intrnal lighting, eletric windows, air blowers, and heated windows. now got a big bag of wires and relays lol. I did get kinda lost to begin with there are some ciruits im unsure about I hope to find out about them soon
|
#10
|
||||
|
||||
Quote:
The same goes for the relay holders with nothing in them cut off the wires from the back or push the holder out with a screwdriver. Be carefull as one of my empty holders had a piece of metal to connect the pins so it looked empty but was doing something. Keep the wires you cut off as you always need a bit once you've binned them. I also kept the main heater feed (from the fuesbox) and after choping the wiper lead off I soldered it back on as i'm undecided if i'm going to keep them or not. I think its easier to make up your mind on the last two when you put the loom back in. Hope that helps a little bit |
Thread Tools | |
Display Modes | |
|
|