![]() |
#1
|
||||
|
||||
![]() Morning guys.
Another sunny Sunday morning.......Not!!! ![]() Just bought a Ford Ka clock on the EBlag. But it came without the plug. Anyone have a Haynes manual, or happen to know how to wire it up? It's got a 6 pin socket, I know 2 wires go to the dash light, and one seems to be blank. I could guess the wires, but frightend of blowing it up and wasting the 99p I paid.... ![]() Cheers David ![]() ![]() |
#2
|
||||
|
||||
![]() Here that's a nice clock
![]() That'll sit nicely in my dash............Well, that's if I had one ![]() I lost track of Ford wiring mid way through the 90's !!?? See quite a few ka's at the breakers, i'll keep my eyes peeled for a plug ![]() The clock itself will only have a live & netural feed ( Bet you already know that though ) The backlight may have a dimmer circuit built in, this would explain some of the extra pins. Sorry mate, about as much use as an ash tray on a motorbike ![]()
__________________
I am not a complete idiot...........Some of the parts are missing !! Ronnie ![]() www.roadster-builders.co.uk |
#3
|
||||
|
||||
![]() Here you go David
Stolen from a post on the net ![]() ![]() ------------------------------------------------------- Ok looking at the pic which is of the back of the clock (with case removed) pins are-Top pair of pins (near the clock mech) Left is Batt + Permanant, Right is-ground, Next pair (down) Left is not used, Right is- illumination (leds), Bottom pair is Left Igh +, Right is not used, What i've done is join the batt and ign wires together and fed them from a battery (permanant live) as i only ran a batt pos, ground and panel lights wires into the headlining, I could'nt see the point of an ign supply as the clock needs to be fed all the time, All seems to work ok this way. ------------------------------------------------------------ Might be of some use ![]() Came from the last post here
__________________
I am not a complete idiot...........Some of the parts are missing !! Ronnie ![]() www.roadster-builders.co.uk |
#4
|
||||
|
||||
![]() Cheers Ronnie.
I searched high and low last night on the titnterwebby, couldn't find anything. Here you go 5 mins later, dun and dusted... ![]() Mind you if I blow it up, you'll owe me 99p or ian619 on the other forum.... ![]() David Last edited by dogwood : 29th November 2009 at 10:43 AM. |
#5
|
||||
|
||||
![]() Quote:
Know how it feels mate Recently spent nearly 2 days searching for the pin-outs of my Zetech engines ECU Gave up in the end Had a look in the Ford Escort manual..............Yep you guessed it.....There they were ![]() ![]() I now have a strict policy of looking in the last place first ![]()
__________________
I am not a complete idiot...........Some of the parts are missing !! Ronnie ![]() www.roadster-builders.co.uk |
#6
|
||||
|
||||
![]() Hi Ronnie.
It works.... ![]() Quick diagram, for anyone else needing it. David ![]() |
#7
|
||||
|
||||
![]() Cool
![]() Pleased your sorted mate ![]() I must be off.............There's something on Egay I need to find ![]() ![]()
__________________
I am not a complete idiot...........Some of the parts are missing !! Ronnie ![]() www.roadster-builders.co.uk |
![]() |
Thread Tools | |
Display Modes | |
|
|