Haynes Forums  

Go Back   Haynes Forums > Haynes Roadster Forums > General discussion
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #841  
Old 18th June 2018, 12:15 PM
Ricky Ricky is offline
Senior Member
 
Join Date: Oct 2009
Location: johannesburg south africa
Posts: 262
Default

Thanks for the info the other thing I'd like to ask you is what have you kept the engine leaned like it is in the original car is it for height issues or what and how much does it stick out the bottom if I may ask and are you using the original gearbox . Is it possible to lay the engine straight instead of leaning
Reply With Quote
  #842  
Old 18th June 2018, 06:05 PM
K4KEV's Avatar
K4KEV K4KEV is offline
Senior Member
 
Join Date: Feb 2010
Location: WINGATE CO DURHAM
Posts: 1,505
Default

At the time, I just wanted to fit the engine the same way as it lay in the 200SX
You could have it level but you will have to take into account the gearbox will angle off centre and the oil pan will not be level (could overcome that with shortened oil pan)....doing this will give you clearance on the bonnet/plenum, you will see with my car it needed a bulge of some sorts to clear
Reply With Quote
  #843  
Old 18th June 2018, 06:27 PM
Ricky Ricky is offline
Senior Member
 
Join Date: Oct 2009
Location: johannesburg south africa
Posts: 262
Default

Ok cool . So I'm thinking of fitting it straight not sure how the gear leaver will be maybe I have to modify some way. You don't by any chance have a pic of the gearbox when it's laying on the floor would like to see how the leaver leans
Reply With Quote
  #844  
Old 19th June 2018, 01:16 PM
K4KEV's Avatar
K4KEV K4KEV is offline
Senior Member
 
Join Date: Feb 2010
Location: WINGATE CO DURHAM
Posts: 1,505
Default

If it was me Ricky I would take gear lever out and heat a point a bit further up from where it exits the gearbox then bend it anti clockwise by the same angle you need to rotate the engine by, just been and checked the angle of mine and it is 11.7 off the horizontal
Reply With Quote
  #845  
Old 19th June 2018, 01:31 PM
Ricky Ricky is offline
Senior Member
 
Join Date: Oct 2009
Location: johannesburg south africa
Posts: 262
Default

Ok thanks kev for the info will see what I can come up with once I'm at that stage
Reply With Quote
  #846  
Old 20th June 2018, 08:04 PM
K4KEV's Avatar
K4KEV K4KEV is offline
Senior Member
 
Join Date: Feb 2010
Location: WINGATE CO DURHAM
Posts: 1,505
Default

Bin up to blinging again .....can't help myself, this thin stainless stuff is great to work with


Reply With Quote
  #847  
Old 23rd June 2018, 01:25 PM
K4KEV's Avatar
K4KEV K4KEV is offline
Senior Member
 
Join Date: Feb 2010
Location: WINGATE CO DURHAM
Posts: 1,505
Default

BACK ON EBAY AGAIN

https://www.ebay.co.uk/itm/232817564514?ul_noapp=true

will still be updating on anything I do to the car which includes a HARD TOP
Reply With Quote
  #848  
Old 25th August 2018, 02:06 PM
K4KEV's Avatar
K4KEV K4KEV is offline
Senior Member
 
Join Date: Feb 2010
Location: WINGATE CO DURHAM
Posts: 1,505
Default

And again this time its an auction (with reserve of course)

https://www.ebay.co.uk/itm/232900674...84.m1555.l2649
Reply With Quote
  #849  
Old 13th October 2018, 12:35 PM
K4KEV's Avatar
K4KEV K4KEV is offline
Senior Member
 
Join Date: Feb 2010
Location: WINGATE CO DURHAM
Posts: 1,505
Default

Roadster up on Ebay for the final time this year, also includes some video's this time
https://www.ebay.co.uk/itm/232960748472
Reply With Quote
  #850  
Old 13th October 2018, 02:59 PM
twinturbo's Avatar
twinturbo twinturbo is offline
Super Moderator
 
Join Date: Jul 2008
Location: Carlisle
Posts: 4,307
Default

I would just wait til spring... Very few people will be looking this time of year except to get a desperate seller..
__________________
You only get a woosh with a dump valve

Build Thread


Man Cave Mantiques



Cecil Street Auto Repairs Garage Carlisle




Build Cost 4181.65 - Last - Wheel Cylinders
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 03:26 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.