Haynes Forums  

Go Back   Haynes Forums > Haynes Roadster Forums > Bodywork and interior
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 16th January 2013, 08:52 PM
Shorty Shorty is offline
Senior Member
 
Join Date: Jul 2010
Location: South shields
Posts: 166
Default Do mx5 seats fit?

I've seen a few comments about mx5 seats fitting but also others that say they don't. I know there are a few mx5 builds so was wondering if those seats fit?
They seem like a nice little sporty seat and I'm sure they would be cheap enough.
Reply With Quote
  #2  
Old 16th January 2013, 09:03 PM
skov's Avatar
skov skov is offline
Senior Member
 
Join Date: Jan 2011
Posts: 1,085
Default

They won't fit without some kind of modification.
If you remove the reclining mechanism and weld the back to the base instead I suspect they'd just squeeze in there.
Reply With Quote
  #3  
Old 16th January 2013, 09:25 PM
Shorty Shorty is offline
Senior Member
 
Join Date: Jul 2010
Location: South shields
Posts: 166
Default

No problem. Would have been handy for mx5 builds.
So does anyone know of any production car seats that fit?
Might be handy to get a list going.
Reply With Quote
  #4  
Old 17th January 2013, 12:28 AM
voucht's Avatar
voucht voucht is offline
Senior Member
 
Join Date: Jun 2011
Location: Lautrec, Tarn (81), Occitanie, France
Posts: 879
Default

Some people fir the middle rear seat of first Renault Megane Scenic.
Reply With Quote
  #5  
Old 17th January 2013, 09:31 PM
Shorty Shorty is offline
Senior Member
 
Join Date: Jul 2010
Location: South shields
Posts: 166
Default

That's a strange one. I expected there to be front seats that fit from small hatchbacks such as corsa, fiesta etc.
I guess there's not much room at all.
Reply With Quote
  #6  
Old 18th January 2013, 09:58 AM
Oscar Oscar is offline
Senior Member
 
Join Date: Sep 2010
Location: Wincanton
Posts: 202
Default

I was suprised by just how small the gap is too, took measurements from a wrecked fiesta we have lying about (oldish, small one) and seats were about 3 inches too wide! Even most bucket-seats are a bit wide!!
__________________
Photos of the project so far:

http://www.flickr.com/photos/oscarss/sets/
Reply With Quote
  #7  
Old 18th January 2013, 10:34 AM
Hoybi's Avatar
Hoybi Hoybi is offline
Member
 
Join Date: Jun 2007
Location: Zonhoven, Belgium
Posts: 60
Default mx-5 seats do fit .... after an angle grinder treatment

I managed to build in a pair of MX-5 seats.
But only after removing the hinge mechanism and some more millimeters of metal. And of course seat and backrest welded in a permanent position.

Also the sliding mechanism has been used, again with some angle grinding and "rectifying".

Eddy
__________________
Eddy
www.alfaprojects.be
Reply With Quote
  #8  
Old 18th January 2013, 12:53 PM
Not Anumber Not Anumber is offline
Senior Member
 
Join Date: Sep 2011
Location: Southend on Sea. UK
Posts: 243
Default

+1 for Renault Scenic middle/rear seats. Ive recently picked up a nice pair of these in grey leather and am just waiting for the weather to improve now to get out there and put them in. The seating position will be a bit higher than the Cobra backets seats that are in at present. Oddly they weigh about the same despite being better padded.
Reply With Quote
  #9  
Old 18th January 2013, 01:15 PM
Shorty Shorty is offline
Senior Member
 
Join Date: Jul 2010
Location: South shields
Posts: 166
Default

Didn't you struggle to get 2 the same trim? Especially leather.
I'm assuming you need them from 2 different cars?
Reply With Quote
  #10  
Old 19th January 2013, 11:35 PM
Numplumb Numplumb is offline
Senior Member
 
Join Date: Aug 2012
Posts: 191
Default

Smart cars have nice seats but I don't know if they are smaller than MX5 ones though
Mick.
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 01:16 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.