Haynes Forums  

Go Back   Haynes Forums > Haynes Roadster Forums > Running gear
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 9th February 2010, 09:22 PM
Tilly819 Tilly819 is offline
Senior Member
 
Join Date: Oct 2008
Location: Leicestershire
Posts: 489
Default play in steering collum???

hi all

quick question
im just trying to finish off the car and was wondering if i shouyld have any sideways play in the steering collum bush were it goes threw the bulkhead???

also should be spring in the collum be slightly compressed when it is put together and bolted in
chears


tilly
Reply With Quote
  #2  
Old 9th February 2010, 09:28 PM
gingea1pom's Avatar
gingea1pom gingea1pom is offline
Senior Member
 
Join Date: Sep 2009
Location: wiltshire
Posts: 826
Default

Quote:
Originally Posted by Tilly819 View Post
hi all

quick question
im just trying to finish off the car and was wondering if i shouyld have any sideways play in the steering collum bush were it goes threw the bulkhead???

also should be spring in the collum be slightly compressed when it is put together and bolted in
chears


tilly
Tilly,

How much sideways play, I have just received said bush from Saturn and when fitted I would have to hang of it to get like a mm of movement.

As for your second question my bold (Im not being a c**K) I don’t understand.

Cheers Ginge
__________________
Sent from my iPad, from who knows where in the world

I was building but I am not now!


Build Pictures


Build Thread
Reply With Quote
  #3  
Old 9th February 2010, 09:37 PM
Bonzo's Avatar
Bonzo Bonzo is offline
Senior Member
 
Join Date: Jul 2007
Location: Cornwall
Posts: 3,321
Default

Hi Tilley

No, you should not have any excessive play in the bush ..... I can't speak for the IVA test but it certainly an MOT failure

Play was quite common in the sierra bush, If you have used a new bush it will need looking into, if not, it will need to be replaced .

My own column is rock steady, fitted with a new bush kit.

As for the spring, i'll have alook into mine tomorrow ..... I don't recall seeing a spring on mine but I know one was fitted to the column that I didn't use !!
__________________
I am not a complete idiot...........Some of the parts are missing !!
Ronnie

www.roadster-builders.co.uk
Reply With Quote
  #4  
Old 9th February 2010, 09:40 PM
gingea1pom's Avatar
gingea1pom gingea1pom is offline
Senior Member
 
Join Date: Sep 2009
Location: wiltshire
Posts: 826
Default

You have a spring if your column is adjustable for height and rake.



Mine has.
__________________
Sent from my iPad, from who knows where in the world

I was building but I am not now!


Build Pictures


Build Thread
Reply With Quote
  #5  
Old 9th February 2010, 10:10 PM
AshG's Avatar
AshG AshG is offline
Super Moderator
 
Join Date: Jul 2008
Location: Rochester
Posts: 1,882
Default

ditch the crap sierra bush and fit a proper bearing. much safer and gives the steering a much more positive feel

Reply With Quote
  #6  
Old 9th February 2010, 10:28 PM
AshG's Avatar
AshG AshG is offline
Super Moderator
 
Join Date: Jul 2008
Location: Rochester
Posts: 1,882
Default

oh and the spring inside the column should compress a bit. the idea of it is to pull the inner column onto the bearings of the outer part of the column. if you are in an accident the leftover spring is meant to absorb some of the shock before the collapse mechanism kicks in. to get the tension right you should be able to pull on the steering wheel from the drivers seat and the column shouldn't come forward.

how do i know all this you ask the bearings in mine were fecked and the steering felt horrible. i got all the replacement bearings from bearingboys just by measuring up the old parts and finding their equivalent.

it could be possible that the bearings in your column are either misaligned or worn out. I would ditch the crap ford rubber bit first.

this is the one you want. they are £10 but when it comes to steering its not worth mucking about

http://www.bearingboys.co.uk/SLFL25_...Bearing-8155-p

basically the little grey bit of plastic that is on the triangular part of the shaft that pushes into the crap bush goes into the middle of this bearing and obs your uncle good steering feel

Last edited by AshG : 10th February 2010 at 10:52 AM.
Reply With Quote
  #7  
Old 9th February 2010, 11:01 PM
Tatey's Avatar
Tatey Tatey is offline
Senior Member
 
Join Date: May 2009
Location: Leicester
Posts: 827
Default

Ash when using that bearing (i think i'll defiantly be buying one), do you need the little sticky out bit on the chassis plate which the old bush sat in?
__________________
1.8 Silvertop Zetec (ZX6R Carbs + Megajolt) + Type 9

My Build Blog: http://www.haynes.co.uk/forums/showthread.php?t=2736 - Last Update: 31st October 2020

Total Spent so far: Stopped counting
Reply With Quote
  #8  
Old 10th February 2010, 12:57 AM
AshG's Avatar
AshG AshG is offline
Super Moderator
 
Join Date: Jul 2008
Location: Rochester
Posts: 1,882
Default

no you don't need it. i would have cut mine off but i couldn't be bothered to repaint it so i turned up some spacers and angled them to suit. it may be worth bulking up the plate around it though as the triangular bit adds strength to that area which would be lost without it
Reply With Quote
  #9  
Old 10th February 2010, 07:50 AM
Tatey's Avatar
Tatey Tatey is offline
Senior Member
 
Join Date: May 2009
Location: Leicester
Posts: 827
Default

So all of that 3mm plate i bought thinking the chassis plate was made out of it and then found out it was 1mm, will come into some good use then
__________________
1.8 Silvertop Zetec (ZX6R Carbs + Megajolt) + Type 9

My Build Blog: http://www.haynes.co.uk/forums/showthread.php?t=2736 - Last Update: 31st October 2020

Total Spent so far: Stopped counting
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 03:32 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.