|
|
|
|
#1
23rd January 2017, 01:29 PM
|
||||
|
||||
If I remember correctly. I used a 12.5mm drill bit for the small cut outs.
Used a hole cutter for the radius of the steering rack arm slots. If you look at the manufactures website for the trim you want to use, they should state the minimum radius for inside bends.
__________________
I am not a complete idiot...........Some of the parts are missing !! Ronnie  www.roadster-builders.co.uk 
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
