#1
|
|||
|
|||
mechanical brake switch
Hi All
bit of advice needed, got a mechanical brake switch but dont know where to fit it on the pedal ,any ideas would be great |
#2
|
||||
|
||||
It depend if you have hang down or floor mounted pedals. And each method have different options based of space, design etc.
That said, I built my own floor mounted pedalbox and here is how I fitted mine - when the pedal was cut, a notch / cam was left for the switch activation. I had to keep the switch in line with pedal for the bias bar push rods (not fitted in pics) to clear Here are some pics of that. Last edited by Wynand : 31st August 2011 at 08:57 AM. |
Thread Tools | |
Display Modes | |
|
|