#1
|
|||
|
|||
Bonnet vents
I have cut out the scoop in my bonnet and cut out a triangle on each side to aid airflow
So just thought i would share a snap with you all to see what you think! They are filled in with some black mesh attached with a hot glue gun It wasnt the most fun thing i have done taking an angle grinder to an absolutely perfect bonnet The reason i did it is all the air coming through the nose and rad has no where to go except under the car or down the tunnel. This also meant my carbs were sucking in hot air, so the thinking was that the triangles help let some air out and the scoop some cool air in The coolant temps were ok but the engine is running cooler with the added ventilation |
#2
|
||||
|
||||
Mark,
They look good; it must have been a leap of faith cutting into the bonnet like you say. I have only had to drill four holes in my nose cone so far that was bad enough. Looking Good. Cheers Ginge
__________________
Sent from my iPad, from who knows where in the world I was building but I am not now! Build Pictures Build Thread |
#3
|
||||
|
||||
funny you should mention it mark. i did exactly the same thing on Saturday.
__________________
My Roadster Is Finished NerNer....... Pigs can fly, you just have to carry them onto the plane. My Pictures http://s707.photobucket.com/user/ashgardiner/profile/ |
#4
|
||||
|
||||
That looks the business Mark.....
All you need is some go faster stripes. Got me cams coming tomorrow, working late tonight so i've got a few hours free tomorrow to fit them. You'll know when i have cos you'll probably hear the launch from Billigham..... AndyH
__________________
Haynes Roadster / Saturn GRP Bodywork. Now available direct through http://www.gillhamonline.co.uk/ or contact me direct on andrew.hugill@ntlworld.com Regards..........AndyH |
#5
|
|||
|
|||
Quote:
I have only done 650 miles in the 24 days its been on the road and loved everyone of em! |
Thread Tools | |
Display Modes | |
|
|