#1
|
|||
|
|||
please show me your welds
hi everyone
im just wondering what the welds are supposed to look like when they are fully welded esp the outside ones are they meant to be ground flat so when the side panels are on they fit nicely if anyone has any nice close up shots of theirs can you please show me thanks Andy |
#2
|
||||
|
||||
Just looking for some pics.
Don't think I've got any. But don't grind the outside one too flat, or you will destroy their strength. Just a slight bump is fine, you wont notice it when you put the sides on anyway.....Well I didn't. David |
#3
|
||||
|
||||
|
#4
|
|||
|
|||
Quote:
your welds look really flat have you ground them down at all thanks Andy |
#5
|
||||
|
||||
hi andy , i´m TIG welding obout 90% of my chassis & the welds turn out realy nice & flat , i´m also using the MIG welder for some parts & to get a strong & flat weld i just use the grinder to make a little groov in the joint & then weld hot! the welds turn out flat but also strong . hope this helps
samy |
#6
|
||||
|
||||
ash, did you fully weld the chassis befor putting the rear tubes on?
|
#7
|
||||
|
||||
yes i fully welded the chassis then welded on the rear tubes. .
|
Thread Tools | |
Display Modes | |
|
|