handbrake cable position

[HandyAndy]

help please

which way is the handbrake cable meant to enter the drum backing plate , from the rear of the car or from the front ?
i,ve seen different photos showing either way but is there a correct or wrong way

thanks Andy
ps, just can,t get my head round this one, my mind is elsewhere at the mo

[drury318]

Andy, it goes into the backplate from the front and attatches to the rear shoe, Dennis.

[HandyAndy]

thanks Dennis

such a basic thing to do but yet my head couldn,t work it out

plus guess who forgot to remove ones thumb before a front upright landed on it ouch ! & thats not the word that came out of my mouth, lol.

thanks
andy

[Hoybi]

Andy,

I've been looking into this as well.
In the Sierra it is clear that the 2 cable guides make a nice S-shape. The cable is connected to the drum back plate at the front side of the car.

I've collected a great deal of pictures of Locost and other Zevenz and there are some that have reversed this.
In practice it would have 2 advantages. That means if it is safe to do so !!!!
First the cable would make only one nice C bend. Secondly, it would mean that the brake pipes can run immediately behind the seat back body panel where they meet the flexy brake pipes at brackets that are safely positioned.

So that's where I am at the moment.
I would like to read some expert advice here.
I'm not going to turn the system back-to-front without good advice. That means if it is safe to do so !!!!

[flyerncle]

Not a good idea to reverse the backplates as there are leading and trailing shoes on the drum set up,and they would be in the wrong direction ie trailing shoe at the front and it is a lot smaller in surface area.

Eddy I am no expert,just my way of looking at it.

[HandyAndy]

Eddy,
thats where i was getting confused myself so thought best to ask the question,

Paul, when its explained like you say then it becomes clear why the set up needs to be the correct way, thanks

cheers guys

andy