|
|
#1
19th September 2010, 09:05 PM
|
|||
|
|||
Westfield propshaft?
Hi,
Just wondering if a propshaft from a westfield would be any good for my build? 1.8cvh and type 9 gearbox. The propshaft is 810mm overall length including the bit that goes into the gearbox. Cheers guys Russ 
|
|
#2
19th September 2010, 10:38 PM
|
||||
|
||||
|
too long cant remember the exact length of my prop im sure handyandy will as ours were only 3mm different
__________________
My Roadster Is Finished NerNer....... Pigs can fly, you just have to carry them onto the plane. My Pictures http://s707.photobucket.com/user/ashgardiner/profile/
|
|
#3
19th September 2010, 10:51 PM
|
|||
|
|||
|
Spoke to andy a while back and he said his measured 642mm from diff flange to gearbox oil seal but wasn't sure how much goes into the gearbox on the westfield one.
Cheers anyway ash
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
