Haynes Forums  

Go Back   Haynes Forums > Haynes Roadster Forums > Chassis
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 16th November 2010, 10:11 PM
Andy_B Andy_B is offline
Senior Member
 
Join Date: Oct 2010
Location: Strathclyde
Posts: 274
Default my chassis pics

Evening all....if i have done this correctly there should be some images of my tacked together chassis...The chassis was supplied by Saturn and i cant sing their praises loud enough ...the technical backup is superb ...the knowledge is phenominal ...if i had this kind of service in my day to day job my hair would still be the same colour and not falling out quicker than i can get to the barbers !!

Anyways the chassis is nearly formed a few wee bits need sorted around the tranny tunnel and i need to sort out that rear cage ...the bottom rails are a few mm out ...measured corner to corner every where today with the lazer tape borrowed on a long term basis from work !!! and i am at the most 2.25mm out....

PS this is the Nocost version of AVS hahah b'tard watermark !!
Attached Images
File Type: jpg PB160079.jpg (27.9 KB, 164 views)
File Type: jpg PB160078.jpg (29.2 KB, 126 views)
File Type: jpg PB160077.jpg (31.7 KB, 113 views)
File Type: jpg PB160075.jpg (28.1 KB, 111 views)

Last edited by Andy_B : 16th November 2010 at 10:13 PM. Reason: spelling
Reply With Quote
  #2  
Old 17th November 2010, 06:42 AM
Wynand's Avatar
Wynand Wynand is offline
Senior Member
 
Join Date: Nov 2010
Location: South Africa
Posts: 173
Default

Looks great. Nice to see a person using a centre line to work from
__________________
Cheers

Wynand
http://5psi.net
Reply With Quote
  #3  
Old 17th November 2010, 09:28 AM
Talonmotorsport's Avatar
Talonmotorsport Talonmotorsport is offline
Senior Member
 
Join Date: Oct 2007
Location: Southminster Essex
Posts: 1,323
Default

What gearbox are you using? If you want to fit a type9 pedal box you have one of the U's around the bell housing in the wrong place.
__________________
Website http://www.talonmotorfabrication.co.uk/

Direct email phil@talonmotorfabrication.co.uk

talonmotorfabrication@gmail.com

Mobile office hours 07514098334
Reply With Quote
  #4  
Old 17th November 2010, 09:34 AM
gaz05 gaz05 is offline
Senior Member
 
Join Date: Jun 2010
Location: Hexham,Northumberland
Posts: 278
Default

I wonder how many of us have made that mistake!
__________________
Total cost so far
Materials £3,150
Tools £855
Reply With Quote
  #5  
Old 17th November 2010, 09:38 AM
Talonmotorsport's Avatar
Talonmotorsport Talonmotorsport is offline
Senior Member
 
Join Date: Oct 2007
Location: Southminster Essex
Posts: 1,323
Default

Me more than once, you would have thought after building 20+ chassis I would remember where it goes by now.
__________________
Website http://www.talonmotorfabrication.co.uk/

Direct email phil@talonmotorfabrication.co.uk

talonmotorfabrication@gmail.com

Mobile office hours 07514098334
Reply With Quote
  #6  
Old 17th November 2010, 10:36 AM
Andy_B Andy_B is offline
Senior Member
 
Join Date: Oct 2010
Location: Strathclyde
Posts: 274
Default

Thanks i am using the MT75 gearbox and 2.0 DOHC engine..
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 05:20 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.