Cp11/ss1

[DaveyB]

Hi, just wonder if anyone can tell me, does CP11 sit on the side of SS1 or the bottom edge of SS1?

Thanks
Daveyb

[voucht]

Hi,
As SS1 is 25mm wide, and as TR3/TR4/D7/D8 are 25mm wide too, CP11 comes under SS1, and not on the side (in another word, SS1 comes on top of CP11) as outer face of CP11 has to be flush with the outer side of TR3/TR4/D7/D8
I don't know if I'm extremely clear, but I hope this help.
Good luck.
Sylvain

[rpjg1975]

If u place cp11 flat on the worktop, ss1 bends round the edge meaning that when positioned on chassis cp11 effectively just fills in the gap between the top rail and the seat back

Note.... Don't forget that they are handed for both sides!

Russ

[DaveyB]

Thanks for your help

Daveyb