|
#1
|
|||
|
|||
Welcome! As above this forum (and Locost Builders) are a wealth of knowledge and cunning ideas
One thing I would say is try to take as much as possible from your donor - it saves money in the long run! I didn't have a donor and it's definitely turned out more expensive. Also maybe check out the prices of components on ebay and take extra care removing items which fetch a good price
__________________
If dysfunction is a function, then I must be some kind of genius. |
#2
|
|||
|
|||
one other think, dont assume your sheet of plywood or whatever you use for your build bench is square, check it corner to corner before you start as i nearly had a chassis 10mm out of square but my dad noticed!!
|
#3
|
|||
|
|||
My ply wood was the same so i just cut all the bottom chassis rails and squared them then bolted them down
__________________
Slowly tipping over the edge into madness |
#4
|
||||
|
||||
Thanks for all the advice, keep it coming I really do need it!
For the build table my plan is to use some angle iron to make a frame for the ply wood table top, is this a good idea? Or should I stick to a wooden one? Not much to report, I have been stripping the donor and selling bits as I go and building a box of stuff I'm keeping. Tonight I have ordered a TMXR flat pack kit from Talon, bit premature but hay ho it might make me work quicker at getting that donor stripped. |
#5
|
||||
|
||||
Getting very close to getting the shell removed now, the spaghetti junction of a wiring loom is labelled up and removed from the engine bay.
Today my flat pack TMXR chassis kit arrived so need to get the donor sorted asap and start the proper building. http://rs1123.pbsrc.com/albums/l556/...h=480&fit=clip http://rs1123.pbsrc.com/albums/l556/...h=480&fit=clip |
#6
|
|||
|
|||
Hi Dean
Are you getting wishbones from Talon to? Well worth waiting for and look the biz if you don't want to make your own. I have also ordered diff mount and nose mount so it can be mounted like a Sierra unit that's not arrived yet so can comment but I will let you know Garf😀 |
#7
|
||||
|
||||
Hi Gary,
Yes I think I will get the talons wishbones and the diff case. I want to make as much myself as I can but I think buying the wishbones will be a hell of a lot easier, especially the fronts. The diff case looks a work of art I don't think it would be something I could replicate! I will keep my eye on your build thread |
Thread Tools | |
Display Modes | |
|
|