#1
|
|||
|
|||
Nose cone drawings
Hi all.
Does anyone have cad drawings for the Haynes nosecone? I want to fabricate it in aluminum and would like to construct a plywood buck to build it. Thanks in advance. Pictures of my build are posted at grichtler.blogspot.com |
#2
|
||||
|
||||
CAD-file available on request
Hello,
I've digitised the "FabbyGlass-parts" a while ago and made CAD-files of these parts (nose cone, scuttle,wheel arches front and rear) Quite a few people have asked and received the files. If you send me a mail I'll you can have the files. DWG ? IGES ? STEP ? STL ? |
#3
|
|||
|
|||
Nose cone drawings
Thank you for your reply Hoibi.
My email is grichtler@msn.com I will keep the forum posted of my progress Cheers Gunter |
#4
|
|||
|
|||
Nose cone drawings
I neglected to give you my preferance in file format. If possible please send them in dwg or dxf.
Thanks again Gunter |
#5
|
|||
|
|||
nose cone drawings
hi does anyone have a nose cone mold drawings that i could use to make my own nose cone and if so could it be posted please!!!
|
#6
|
|||
|
|||
Nose cone drawings
anyone please ?
|
#7
|
||||
|
||||
Hoybi's 3D model takes around 15 MB in IGES format, so it's not trivial to just post it. Drop me your email and I'll send it to you.
__________________
Albert Haynes Roadster FAQ | Haynes Builder Locations Gallery, build thread in Lithuanian / via Google Translate. |
#8
|
|||
|
|||
nose cone drawings
hi thanks alot this is my email rjt.correia@gmail.com
|
#9
|
|||
|
|||
Nose cone drawings
Hi alga how you i see that you a 3d drawings of a nose cone i was wondering if you could PLEASE email it to me if you don't mind that is my email is rjt.correia@gmail.com
|
#10
|
|||
|
|||
Hi.
This is nose number three on my Locost +4. (please don't ask about 1 & 2) Sorry, no drawings. I made the plywood buck on the car. There then followed several weeks of head scratching, but it was worth it in the end. Paul G |
Thread Tools | |
Display Modes | |
|
|