|
#1
|
||||
|
||||
Rev counter
After getting all the redundant wiring out of the loom and everything working except the lights and megajolt, it's just the rev counter I need to get working now. I've put the green wire from my edis into the right pin on instrument cluster (see attached picture) but when I run the engine the rev counter doesn't move I checked the voltage at the pin and with the key in position 2 and the engine off, it reads around 0.05v, with the engine running & idling, I get a reading around 0.35-0.39 (fluctuates). So would this mean the sierra instrument cluster handy andy gave me isn't compatible with an edis?
|
#2
|
||||
|
||||
Thanks adrian, it did help a bit. I must say making the circut with diodes etc is a bit daunting as I've never made anything electrical before! If I have to go down that route, can I get stuff like that from maplins or ebay? I have no idea what to look for as the codes quoted don't mean anything to me I did come across this http://www.minifinity.com/forum/view...p?f=5&p=852579 which seems to indicate that pin 11 on the edis might work instead of pin 2 which I've already tried.
|
#3
|
|||
|
|||
Quote:
|
#4
|
||||
|
||||
Ah right so that's what those things are for on trigger wheels. So how do they connect to the coilpack?
|
#5
|
|||
|
|||
You can also make it work from the alternator like the diesels do.
Bob
__________________
When The Results Disagree With The Theory: Believe The Results And Invent A New Theory If I had two brains I,d still be a halfwit The cave http://s1116.photobucket.com/user/my...deshow/mancave The build http://www.haynes.co.uk/forums/showthread.php?t=12669 |
#6
|
|||
|
|||
They have 2 wires going in and one coming out, the single wire goes to rev counter and the other two go to opposite sides of the coil pack
|
#7
|
||||
|
||||
So do the wires just go onto the plug that connects the edis to the coilpack?
|
Thread Tools | |
Display Modes | |
|
|