#1
|
||||
|
||||
Closing for winter
Hi guys,
Just wanted to let you know that I closed the workshop and covered the chassis as I will not be touching the car during the next 2-3 months. IMG_2971.JPG Actually, as some of you already know, my second job is diving instructor, and finally, I leave cold and snowy Sweden this year again to go to South East Asia for diving a couple of months. It is a bit "going back home" for me as I've been working four winter seasons in Thailand, and one summer in Malaysia between 2007 and 2012 as a diving instructor. And I don't get bothered going back there, these places offer such good life and excellent diving. This year, I'm starting an on-line diving booking website, and the main purpose of my trip this year will be to make contact with partner dive shops. So I'm going to Thailand, Burma, Indonesia, Malaysia... poor me I take the plane tomorrow, so on Thursday, I'll be wearing my shorts and flip flops! But I will still check the forum, I'll be "on-line" most of the time. Regarding the brake lines, you can still contact me for that as I will still be in contact with the company in France (I'm still working for them in a distance, where ever I am in the world ) ... and may be I'll post one or two pictures to share a few sunbeams with you guys. Good luck for you builds, jobs, IVA tests, and so on... Bye !
__________________
Sylvain Pictures of my completed Roadster https://www.flickr.com/photos/994983...7646799525542/ Build blog: http://vouchtroadster.blogspot.se/ https://cafrazx550.blogspot.com/ |
#2
|
||||
|
||||
Great work if you can get it, sounds awesome man, have a great time
__________________
Rotary Roadster build finally started.... |
#3
|
|||
|
|||
Pic looks like a coffin ----RIP roadster
|
#4
|
|||
|
|||
Best of luck.
Bob
__________________
When The Results Disagree With The Theory: Believe The Results And Invent A New Theory If I had two brains I,d still be a halfwit The cave http://s1116.photobucket.com/user/my...deshow/mancave The build http://www.haynes.co.uk/forums/showthread.php?t=12669 |
#5
|
||||
|
||||
have a good one and be safe
|
#6
|
||||
|
||||
I hope you have a great time out there Sylvain
Look forward to some nice sunny pics.
__________________
I am not a complete idiot...........Some of the parts are missing !! Ronnie www.roadster-builders.co.uk |
#7
|
||||
|
||||
Jammy bugger hope you have a good time bud....will be needing one more line from you ...I have a master cylinder for a clutch and the flare nut union is 12 x 1....and I have a slave cylinder from a alfa 156 and it is this one I am struggling to find out the flare nut size, I think it might be 7/16 x 24 but not sure yet, so if I am reading you right ...you can still process orders from us lot.
like I say Syl av a gud un. cheers mate Kev |
#8
|
|||
|
|||
ooh, ears prick up... diving, hmmm, any discounts??.... lol.... have a great time and be safe.... lucky bugger.... cold north sea and cold lakes for me.... brrrrr
|
#9
|
|||
|
|||
I am assuming that you are one of those P.A.D.I. instructors, cross to the dark side and become a proper instructor, where you enter the water with a 14" dagger between your teeth and a hacksaw and prybar on your utility belt.
Yep you guessed it B.S.A.C open water instructor, never been to the east, have a great time and dont forget the deco stop after a hard day at the office Arfon p.s but I have been to Cuba, Egypt, The canaries(all four), Malta, Turkey, Greek mainland Corfu,Rhodes,Zante,Scapa Flow oh and most of the decent sites in the U.K., only regret is I havn't been to Oban |
#10
|
|||
|
|||
12x1 is Peugeot and some vauxhall pipe ends,usually load sensing valves and pug wheel cylinders.
Got plenty if you are stuck.
__________________
Cost : Little as possible. Thanks : To those who by their generosity my build has progressed. Its a handmade sports car not a flaming kit car !!! If at first you dont succeed,avoid skydiving... No parachute require to freefall,only if you want to do it twice. |
Thread Tools | |
Display Modes | |
|
|