#461
|
||||
|
||||
Indicators possible Plan B. I thought the washer idea from the headlights might work here.
I will probably have to glue this on so plan C is a hybrid of one of these slightly smaller with shrink wrap holding it in place. Cheers Stot
__________________
1.6 Mazda B6 : Garrett TBO339 : 420cc WRX Injectors : FMIC : Microsquirt V3 : LC-2 Wideband : Toyota COP Build Started Jan 2013 : OTR Aug 2014 : Build Pictures |
#462
|
||||
|
||||
Ok so Plan A worked out perfectly.
When shrunk this is over 1mm thick so the radius is more like 3.5mm now. Now that I have the heat shrink I think it would be/have been a good solution to the shock tops and even the headlight brackets too! Cheers Stot
__________________
1.6 Mazda B6 : Garrett TBO339 : 420cc WRX Injectors : FMIC : Microsquirt V3 : LC-2 Wideband : Toyota COP Build Started Jan 2013 : OTR Aug 2014 : Build Pictures |
#463
|
||||
|
||||
Clever that, I didn't know you could get heat shrink that big. Where did you get your track rod end covers from? Do you have a link?
|
#464
|
|||
|
|||
Quote:
I got mine from furore. They were fairly cheap but I'm you you can buy them at screwfix as they are just electrical glands. With the agm bodywork the front lower wishbones adjuster tube sticks out. I have bought 4 x 25mm silicone black end caps from ash hoses and they cover them nicely. David
__________________
Click to see my build photos on Flikr http://www.flickr.com/photos/67112582@N03/ Saturn MX5 Based Chassis, Limited Slip Diff & 2.4 Quick Rack. Build cost.... seems to be spending more on tools than car bits at the moment! (they will be handy in the future though). Car iva'd and passed 15/08/2014. Finished weight 572kg. |
#465
|
||||
|
||||
Yep I got them through Fururueuoore too but on ebay.
Just snip the tip off and they slide on nicely. The ones from Screw Fix come with all the gubbins you dont need. Cheers Stot
__________________
1.6 Mazda B6 : Garrett TBO339 : 420cc WRX Injectors : FMIC : Microsquirt V3 : LC-2 Wideband : Toyota COP Build Started Jan 2013 : OTR Aug 2014 : Build Pictures |
#466
|
||||
|
||||
Almost looks like they came that way. Thats the IVA failure list done except the headlight aim, roll on Wednesday! Cheers Stot
__________________
1.6 Mazda B6 : Garrett TBO339 : 420cc WRX Injectors : FMIC : Microsquirt V3 : LC-2 Wideband : Toyota COP Build Started Jan 2013 : OTR Aug 2014 : Build Pictures |
#467
|
||||
|
||||
Thanks for that I will purchase some forthwith... They look better than before Andrew.
|
#468
|
||||
|
||||
I got my TDI intercooler in the post today for my post IVA project.
Its not huge, 8" x 7" x 3.5" core but should fit nicely in the nose cone and be fine for my purposes. It even came with a combined 3bar MAP and IAT sensor I can mount onto my intake plenum. All for £18, cant grumble. Cheers Stot
__________________
1.6 Mazda B6 : Garrett TBO339 : 420cc WRX Injectors : FMIC : Microsquirt V3 : LC-2 Wideband : Toyota COP Build Started Jan 2013 : OTR Aug 2014 : Build Pictures Last edited by Stot : 18th July 2014 at 11:04 PM. |
#469
|
||||
|
||||
Well that all worked.
Whoop! Cheers Stot
__________________
1.6 Mazda B6 : Garrett TBO339 : 420cc WRX Injectors : FMIC : Microsquirt V3 : LC-2 Wideband : Toyota COP Build Started Jan 2013 : OTR Aug 2014 : Build Pictures |
#470
|
||||
|
||||
Woo hoo, nice one mate!
|
Thread Tools | |
Display Modes | |
|
|