MT75 box + Vibration damper

[axle]

Hi all
Has any body with MT75 gear box has bothered to fit the vibration damper or will it be ok without it?

[RAYLEE29]

hi that and the doughnut were two of the many things that swayed me to use the type 9 I had instead of the mt75 thats now sat out on the drive.
sorry its not much help but I would try and do away with both not sure if you can get a flange to fit the rear of the box instead of the spider type coupling but that would be the way to go if you can.
Ray

[axle]

Hi
Thanks for your response, I have had advise from other wise buddies. The damper is no longer necessary when the UJ is removed. I am also having the sliding spline on the prop.