#1
|
|||
|
|||
waxing lyrical
my car chassis and running gear is covered in what i assume is wax oil . what would be the best way to remove this? the resultant parts will then be prepped for paint etc.smoothrite? also ive been reading about cleaning parts using electrolosis . is it ok to drop a complete hub and caliper in? would this affect the bearings seals etc.any help would be appreciated.::
|
#2
|
||||
|
||||
the gearbox on my sierra was covered in wax oil i used autoglym intensive tar remover, a wire brush and pressure washer to get it off... worked a treat
Jake
__________________
its reight! is not a suitable measurement! |
#3
|
||||
|
||||
Quote:
|
#4
|
|||
|
|||
Parafin is what you need to clean it off. you use parafin instead of heating it up when you want to spray it..
|
#5
|
|||
|
|||
evil bay
parrafin sounds good . probably because a new wolf air compressor is on its way. thanks for the replys lads.
|
Thread Tools | |
Display Modes | |
|
|