Haynes Forums  

Go Back   Haynes Forums > Haynes Roadster Forums > Running gear
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 17th March 2010, 07:41 PM
AshG's Avatar
AshG AshG is offline
Super Moderator
 
Join Date: Jul 2008
Location: Rochester
Posts: 1,882
Default Camber Adjuster Failure Warning!!!

Had a rather nasty failure on the car today. The one of the quick camber adjusters on the front suspension decided to catastrophically fail and allow the top wishbone to detach from the hub.

My friend chris was driving at the time luckily he noticed that it had failed and stopped before the front wheel parted company with the car.

i would seriously advise you to think about changing them for stronger items if they are on your car or revert back to the book wishbone design with the fixed threaded tube

this is the adjuster in question



and this is the failed one.



yes your not seeing things the bolt head as completely come off
Reply With Quote
  #2  
Old 17th March 2010, 07:46 PM
spud69's Avatar
spud69 spud69 is offline
Senior Member
 
Join Date: Jul 2008
Location: Hartlepool
Posts: 1,678
Default

Bloody Nora Ash,

We are selling the same ones and yes the Alloy does look very light but you would expect that they have been tested as fit for purpose.

Will be removing them from sale forthwith.

Only Flynercle has bought these to date, if you are reading this. If not then we shall see you on Saturday.

Cheers Ash.....AndyH
__________________
Haynes Roadster / Saturn GRP Bodywork. Now available direct through http://www.gillhamonline.co.uk/ or contact me direct on andrew.hugill@ntlworld.com

Regards..........AndyH
Reply With Quote
  #3  
Old 17th March 2010, 08:18 PM
dogwood's Avatar
dogwood dogwood is offline
Senior Member
 
Join Date: Mar 2008
Posts: 899
Default

It seems to me Ash,
if you didn't have bad luck you would'nt have any luck at all.

So I can guess what you'll be up to over the weekend.
Still I suppose it's better it shows up now and not when you are giving it a spanking
__________________
.
.
David.

Heaven, Warm days and Cool rides
Reply With Quote
  #4  
Old 17th March 2010, 08:22 PM
AshG's Avatar
AshG AshG is offline
Super Moderator
 
Join Date: Jul 2008
Location: Rochester
Posts: 1,882
Default

well my dilemma now is do i remake new ones in steel and hope they are strong enough or make a whole new set of upper wishbones front and back to the standard book design without the quick adjuster?
Reply With Quote
  #5  
Old 17th March 2010, 08:30 PM
Janne E Janne E is offline
Senior Member
 
Join Date: Mar 2009
Location: Varberg / Sweden
Posts: 135
Default

I have them in the front but now I got to get some in steel.
Wonder what Rally Design have to say about this????

Janne
Reply With Quote
  #6  
Old 17th March 2010, 08:35 PM
dogwood's Avatar
dogwood dogwood is offline
Senior Member
 
Join Date: Mar 2008
Posts: 899
Default

Quote:
Originally Posted by Janne E View Post
.
Wonder what Rally Design have to say about this????
Janne
Good point Janne..

I suppose steel will be stronger,
but will you always be wondering..

Think if it was me, I would make a set of steel ones for now.
but make a new set of bones before I did any engine mods....
__________________
.
.
David.

Heaven, Warm days and Cool rides
Reply With Quote
  #7  
Old 17th March 2010, 08:32 PM
Davey's Avatar
Davey Davey is offline
Senior Member
 
Join Date: Dec 2009
Location: Telford
Posts: 1,040
Default

Personally I'd say go for the book design. Why bother with quick adjusters anyway, it only takes a few minutes to knock out the top ball joint and screw it in or out a turn but with about 5-6mm of steel around the threads its unlikely to fall apart.

D.
__________________
visit my website at www.cossie.davenewell.co.uk
Reply With Quote
  #8  
Old 17th March 2010, 08:32 PM
frankie boy's Avatar
frankie boy frankie boy is offline
Senior Member
 
Join Date: Apr 2007
Location: Chingford, London
Posts: 191
Default

Quote:
Originally Posted by AshG View Post
well my dilemma now is do i remake new ones in steel and hope they are strong enough or make a whole new set of upper wishbones front and back to the standard book design without the quick adjuster?
Thats made me think. As i have made them back and front on my new build.
Thay must have sold hundreds of them so im thinking how many have failed.

If i remember right you had cut them to suite. Do you think this may have had something to do with it?
__________________
my Roadster
http://www.flickr.com/photos/15477685@N06/
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 03:35 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.