Haynes Forums  

Go Back   Haynes Forums > Haynes Roadster Forums > Running gear
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 23rd July 2009, 11:00 AM
Bonzo's Avatar
Bonzo Bonzo is offline
Senior Member
 
Join Date: Jul 2007
Location: Cornwall
Posts: 3,321
Question What is happening

Well chaps the posts are going thick and fast now

I was about to give this reply to Andys handbrake thread & now its gone.

Hi Andy

I had a quick look at the possible route of the handbrake cable yesterday, not having a cable to hand, I did think to myself " That is going to be tight "

Perhaps if you can post a picture I can offer some better advice.
There are, p clamps that you can get to support handbrake cables & the likes.



Adrian

On the first set of uprights I made, I too had some clearance issues.

Not wanting to go through the hassle of making plates RU7 & RU8 again by hand, I bought them from 3GE

Having looked long & hard into the potential clearance issues, I decided to construct the rear uprights slightly different.

Heres some pictures of the minor changes made.

Upright carcasses



Once these were made to this stage.

I placed RU7 on top of the tube RU5 as opposed to flush with the face of it.

Two reasons for this.
1: I felt that I could get a better quality weld between RU7 & RU5.
2: I gained an extra 10 mm on the upright

Plate RU8 was then welded to RU7 as per book.

A couple more pictures of the uprights fitted to the chassis





Sorry the pictures are not very clear but Do feel that they illustrate what I have gained from this minor change.

10mm extra clearance in the following areas . Handbrake cable, bleed nipple,
more room to fix the flexi hose. Finally 10mm extra clearance between the lower wishbone fixings & wheel rim

To compensate for the extra 10mm gained in the upright. the wishbones were made to the original book spec ( First edition ) & using the driveshafts as is.

All have been fitted to the car & I am pleased with the result.

I am not saying that this is the way it should be done. Just a personal choce that I decided to make .

EDIT

Please note, I have not as yet fully welded RU5 to RU7 & RU8
__________________
I am not a complete idiot...........Some of the parts are missing !!
Ronnie

www.roadster-builders.co.uk

Last edited by Bonzo : 23rd July 2009 at 01:49 PM. Reason: More text
Reply With Quote
  #2  
Old 23rd July 2009, 11:38 AM
HandyAndy's Avatar
HandyAndy HandyAndy is offline
Senior Member
 
Join Date: Jan 2009
Location: cleveland
Posts: 3,917
Default

i,ll take some photos of where i,m at with my handbrake cable today & post them later.

thanks guys.

andy
__________________
Flat Pack Chassis Kits for sale, contact me at andyroadster@yahoo.co.uk
Reply With Quote
  #3  
Old 23rd July 2009, 01:38 PM
mark mark is offline
Senior Member
 
Join Date: Mar 2009
Location: Billingham (north east)
Posts: 770
Default

If you are having trouble with your handbrake andy just come and see mine if you like its all installed and works a treat im sure we can sort it between us!

Mark
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 03:22 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.