Haynes Forums  

Go Back   Haynes Forums > Haynes Roadster Forums > Announcements
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 11th April 2010, 11:02 PM
martin62 martin62 is offline
Member
 
Join Date: Feb 2009
Location: limerick Ireland
Posts: 91
Default Front upper wishbone jig

Hi can someone help I was makine my front upper wishbone jig today and was trying to find a measurment for the 2 front 25x6 angled brackets.what I am looking for is the lenght of the front edge which is on 5.12 on page 63. Otherwise had a good day got all my front suspension brackets lined up and tacked up 7.30am start and had a very nice visit from transverse which was great having someone likeminded to chat too.
Reply With Quote
  #2  
Old 12th April 2010, 09:47 AM
Bonzo's Avatar
Bonzo Bonzo is offline
Senior Member
 
Join Date: Jul 2007
Location: Cornwall
Posts: 3,321
Default

That measurement can be nicked from the drawing on page 61.

The length is given as 236mm to the centre of the wishbone bush tube

So 236mm + half the width of the bush tube. On the book spec tube, this is approximately 17mm .... Unless you have a tape measure that has fractions of a mm graduations on it

I make the overall length of the upper front wishbone 253mm.
__________________
I am not a complete idiot...........Some of the parts are missing !!
Ronnie

www.roadster-builders.co.uk
Reply With Quote
  #3  
Old 13th April 2010, 01:00 AM
martin62 martin62 is offline
Member
 
Join Date: Feb 2009
Location: limerick Ireland
Posts: 91
Default

Quote:
Originally Posted by Bonzo View Post
That measurement can be nicked from the drawing on page 61.

The length is given as 236mm to the centre of the wishbone bush tube

So 236mm + half the width of the bush tube. On the book spec tube, this is approximately 17mm .... Unless you have a tape measure that has fractions of a mm graduations on it

I make the overall length of the upper front wishbone 253mm.
Hi Ronnie sorry if I was not clear in my question but I ment the height of the 2 angled pieces that are set at 98 degrees thanks Aidan
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 10:30 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.