Haynes Forums  

Go Back   Haynes Forums > Haynes Roadster Forums > Running gear
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 22nd July 2019, 10:38 PM
CarlW CarlW is offline
Member
 
Join Date: Aug 2016
Posts: 98
Default Front Top Wishbones

Hi Guys,

Trying to work out the correct way the front top wishbones should be on the sierra uprights. Anyone have any pics?

The threaded part is at an angle to the two tubes, does the threaded tube point up or down to the upright.
The thread is offset from center, I am guessing reward mount to get positive castor?
Reply With Quote
  #2  
Old 23rd July 2019, 05:57 PM
TSM Locost's Avatar
TSM Locost TSM Locost is offline
Senior Member
 
Join Date: Mar 2007
Location: Wisbech
Posts: 423
Default

Upwards and longest leg of the arm at the front
__________________
Be Lucky, Mike.
Reply With Quote
  #3  
Old 23rd July 2019, 09:28 PM
CarlW CarlW is offline
Member
 
Join Date: Aug 2016
Posts: 98
Default

Perfect! Many thanks.


On the rear, the two intersecting tubes at the chassis mount, towards the front of the car?
Top one then mounted so its equally in the middle of the two lower mounts?

Many thanks!
Reply With Quote
  #4  
Old 24th July 2019, 02:11 PM
voucht's Avatar
voucht voucht is offline
Senior Member
 
Join Date: Jun 2011
Location: Lautrec, Tarn (81), Occitanie, France
Posts: 879
Default

Quote:
Originally Posted by CarlW View Post

On the rear, the two intersecting tubes at the chassis mount, towards the front of the car?
I Carl,

As said in the book page 73 regarding rear wishbones:
"The lower wishbones need to be installed with the cross brace angled from outside rear to inside front"

The picture Fig. 5.32 page 74 shows the RH side of the car:

RearSuspAssembled by Voucht71, sur Flickr

Quote:
Originally Posted by CarlW View Post

Top one then mounted so its equally in the middle of the two lower mounts?
Then, you attach the lower points of the rear upright to the lower wishbone, and there is only one way the upper wishbone can be installed to fall perfectly between plates RU2 of the rear upright when in place.

Hope that will help
Reply With Quote
  #5  
Old 24th July 2019, 02:30 PM
CarlW CarlW is offline
Member
 
Join Date: Aug 2016
Posts: 98
Default

Hi ya,

Yep, exactly how I have it.

Perfect!!!!

Top guys as usual!!!!
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 06:37 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.