Haynes Forums  

Go Back   Haynes Forums > Haynes Roadster Forums > SVA/Legal
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 9th February 2016, 09:51 AM
TheArf TheArf is offline
Senior Member
 
Join Date: Jan 2010
Location: Wrexham North Wales
Posts: 1,041
Default Rear number plate

Good morning guys, a quick question for those that have been through the SVA, is there a set hight for the rear number plate. I have down loaded the manual and I think I'm suffering from legal jargon blindness, I have also down loaded the illustration from Westfield that gives all of the dimensions for the lights, minimum and maximum distances/heights etc.

Any help on this would be appreciated

Arfon
Reply With Quote
  #2  
Old 9th February 2016, 10:17 AM
flyerncle flyerncle is offline
Senior Member
 
Join Date: Mar 2008
Location: gateshead,near cobbly bit of A1 North
Posts: 3,188
Default

(2) Subject to paragraph (3), a registration plate shall be fixed vertically or, where that is not reasonably practicable, in a position as close to the vertical as is reasonably practical at the front and rear of every motor vehicle in such manner that the characters of the registration mark shall, at all
times, be visible from the front or the rear of the motor vehicle..

I think there was an exemption for the front one as there is not much to attach it too, and there does not seem to be a height stated apart from it must not be above a certain height.
__________________
Cost : Little as possible.
Thanks : To those who by their generosity my build has progressed.
Its a handmade sports car not a flaming kit car !!!


If at first you dont succeed,avoid skydiving...

No parachute require to freefall,only if you want to do it twice.
Reply With Quote
  #3  
Old 9th February 2016, 10:53 AM
TheArf TheArf is offline
Senior Member
 
Join Date: Jan 2010
Location: Wrexham North Wales
Posts: 1,041
Default

I found that, I just wanted to check up on the max/min height if there was one.
Knowing my luck if I just located one it would be in the wrong place.

Arfon
Reply With Quote
  #4  
Old 10th February 2016, 10:40 AM
flyerncle flyerncle is offline
Senior Member
 
Join Date: Mar 2008
Location: gateshead,near cobbly bit of A1 North
Posts: 3,188
Default

Don't know why I bother.......
__________________
Cost : Little as possible.
Thanks : To those who by their generosity my build has progressed.
Its a handmade sports car not a flaming kit car !!!


If at first you dont succeed,avoid skydiving...

No parachute require to freefall,only if you want to do it twice.
Reply With Quote
  #5  
Old 10th February 2016, 11:14 AM
TalonMotorFabrication TalonMotorFabrication is offline
Senior Member
 
Join Date: Jun 2011
Location: Southminster Essex
Posts: 260
Default

Quote:
Originally Posted by flyerncle View Post
Don't know why I bother.......
I now use the general rule of thumb that is if 3/4 of the answer has already been posted in the question then by the time you have looked up the answer and posted a reply then the penny would have already dropped. Conclusion: I also wonder why I bother so lately I don't.
__________________
Unofficially rated No.1 supplier of fabricated Haynes Roadster parts by the workshop rat population.

Direct email talonmotorfabrication@gmail.com
Reply With Quote
  #6  
Old 10th February 2016, 01:51 PM
flyerncle flyerncle is offline
Senior Member
 
Join Date: Mar 2008
Location: gateshead,near cobbly bit of A1 North
Posts: 3,188
Default

But you have.........
__________________
Cost : Little as possible.
Thanks : To those who by their generosity my build has progressed.
Its a handmade sports car not a flaming kit car !!!


If at first you dont succeed,avoid skydiving...

No parachute require to freefall,only if you want to do it twice.
Reply With Quote
  #7  
Old 10th February 2016, 06:07 PM
TheArf TheArf is offline
Senior Member
 
Join Date: Jan 2010
Location: Wrexham North Wales
Posts: 1,041
Default

Look guys I'm not trying to be funny, I was just wondering if I had overlooked something in the manual, that's all
many thanks for your efforts

kindest regards

Arfon
Reply With Quote
  #8  
Old 11th February 2016, 09:34 AM
flyerncle flyerncle is offline
Senior Member
 
Join Date: Mar 2008
Location: gateshead,near cobbly bit of A1 North
Posts: 3,188
Default

Look at most small cars and the rear plate is possibly 1ft of the ground,I would/will (eventually) put it low down but not too close to the edge of the panel.
__________________
Cost : Little as possible.
Thanks : To those who by their generosity my build has progressed.
Its a handmade sports car not a flaming kit car !!!


If at first you dont succeed,avoid skydiving...

No parachute require to freefall,only if you want to do it twice.
Reply With Quote
  #9  
Old 13th February 2016, 12:17 AM
leroybrown911 leroybrown911 is offline
Senior Member
 
Join Date: Jul 2010
Location: North Wales
Posts: 236
Default

Crikey Arf, bet U sorry U said anything! Looking at the range of height on cars on the road I don't think t would matter as long as it was a foot or so from the floor. If there is no dimension to work to, then there is no dimension to judge by.
__________________
My Blog : leroysroadster.wordpress.com
Reply With Quote
  #10  
Old 13th February 2016, 09:56 PM
TheArf TheArf is offline
Senior Member
 
Join Date: Jan 2010
Location: Wrexham North Wales
Posts: 1,041
Default

Maybe I will think before I ask next time. How are things going your end Lee, is progress still going well, I've taken the haynes into work now and the Cobra has gone home. I'm trying to push on the haynes and put the Cobra on the back burner until I've finished. How is work are you still on the 350 what are orders like, I hear it has gone pretty quiet on the 380.
I'll give you a bell sometime and try to catch up with you and Ajay, saying that he did call into work yesterday for a quick catch up but I was just locking up for the weekend so maybe we need to get together soon maybe the top of the horseshoe pass for a coffee.
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 06:26 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.