Haynes Forums  

Go Back   Haynes Forums > Haynes Roadster Forums > Chassis
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 9th April 2010, 04:29 PM
Tatey's Avatar
Tatey Tatey is offline
Senior Member
 
Join Date: May 2009
Location: Leicester
Posts: 805
Default Wishbone Seamless Tube Price

How much does everyone tend to pay for the seamless tube? I've worked out you need 4m of 25mm outside diameter and 2m of 19mm outside diameter. I rang up my local supplier and they quoted me:

26 for 6m of the 19mm OD seamless with a 3mm wall thickness
43 for 6m of the 25mm OD seamless with a 3mm wall thickness

Do these prices seem reasonable to people? It would mean that my wishbones would come in at a total of 130 including the threaded tube, wishbone plates, bush tubes and seamless tube, with lots of extra 19mm seamless and 2m of 25mm seamless spare.

Also what wall thickness does the seamless tube need to be? I can't seem to find the number in the book, so I guessed at 2mm and 3mm, but my supplier doesn't stock 2mm.
__________________
1.8 Silvertop Zetec (ZX6R Carbs + Megajolt) + Type 9

My Build Blog: http://www.haynes.co.uk/forums/showthread.php?t=2736 - Last Update: 11 June 2013

Total Spent so far: Stopped counting
Reply With Quote
  #2  
Old 9th April 2010, 04:38 PM
geeman's Avatar
geeman geeman is offline
Senior Member
 
Join Date: Jun 2009
Location: Croydon
Posts: 318
Default

i got my seamless from a local farm who seemed to have excess seamless left over. I got all the seamless i needed for the wishbones for 25, and the guy cut it into 450mm lengths for me.

Also i asked some places for 19mm, and they said the didnt have any but then asked for 3/4 in and they did. so ask for 3/4 in and 1in tubing as well as i found some suppliers dont realise that those are usually the same.
__________________
my build pics
Reply With Quote
  #3  
Old 9th April 2010, 07:16 PM
AshG's Avatar
AshG AshG is offline
Super Moderator
 
Join Date: Jul 2008
Location: Rochester
Posts: 1,882
Default

you only need 3m of 19mm for the upper bones you want 6m for the lower ones though.

ringwood engineering are the people i got mine from
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 10:06 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.