Haynes Forums  

Go Back   Haynes Forums > Haynes Roadster Forums > Chassis
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 6th November 2010, 09:26 PM
misty misty is offline
Senior Member
 
Join Date: Jul 2010
Posts: 262
Default wishbones

my wishbones seem to be very stiff would there be anything wrong or should they be that way
Reply With Quote
  #2  
Old 6th November 2010, 09:29 PM
spud69's Avatar
spud69 spud69 is offline
Senior Member
 
Join Date: Jul 2008
Location: Hartlepool
Posts: 1,678
Default

When supported on the brackets Misty they should be self supporting, dont have to be buts its a general guide, and be able to push them down quite easily. As long as you have greased the crush tube, silicone grease or copper slip, they will be fine. THe bushes need to be tight on the crush tube to work properly.

Regards...AndyH
__________________
Haynes Roadster / Saturn GRP Bodywork. Now available direct through http://www.gillhamonline.co.uk/ or contact me direct on andrew.hugill@ntlworld.com

Regards..........AndyH
Reply With Quote
  #3  
Old 6th November 2010, 09:35 PM
misty misty is offline
Senior Member
 
Join Date: Jul 2010
Posts: 262
Default

that's good cause they are self supporting and you can push them down or pull them up easily with very little push or pull but still firm . the rear are abit stiffer and you do need to push and pull quite a bit more to move them
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 02:55 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.