#1
|
|||
|
|||
my chassis pics
Evening all....if i have done this correctly there should be some images of my tacked together chassis...The chassis was supplied by Saturn and i cant sing their praises loud enough ...the technical backup is superb ...the knowledge is phenominal ...if i had this kind of service in my day to day job my hair would still be the same colour and not falling out quicker than i can get to the barbers !!
Anyways the chassis is nearly formed a few wee bits need sorted around the tranny tunnel and i need to sort out that rear cage ...the bottom rails are a few mm out ...measured corner to corner every where today with the lazer tape borrowed on a long term basis from work !!! and i am at the most 2.25mm out.... PS this is the Nocost version of AVS hahah b'tard watermark !! Last edited by Andy_B : 16th November 2010 at 09:13 PM. Reason: spelling |
#2
|
||||
|
||||
Looks great. Nice to see a person using a centre line to work from
|
#3
|
||||
|
||||
What gearbox are you using? If you want to fit a type9 pedal box you have one of the U's around the bell housing in the wrong place.
__________________
Website http://www.talonmotorfabrication.co.uk/ Direct email phil@talonmotorfabrication.co.uk talonmotorfabrication@gmail.com Mobile office hours 07514098334 |
#4
|
|||
|
|||
I wonder how many of us have made that mistake!
__________________
Total cost so far Materials £3,150 Tools £855 |
#5
|
||||
|
||||
Me more than once, you would have thought after building 20+ chassis I would remember where it goes by now.
__________________
Website http://www.talonmotorfabrication.co.uk/ Direct email phil@talonmotorfabrication.co.uk talonmotorfabrication@gmail.com Mobile office hours 07514098334 |
#6
|
|||
|
|||
Thanks i am using the MT75 gearbox and 2.0 DOHC engine..
|
Thread Tools | |
Display Modes | |
|
|