Haynes Forums  

Go Back   Haynes Forums > Haynes Roadster Forums > Running gear
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #31  
Old 12th April 2012, 11:57 PM
robo robo is offline
Senior Member
 
Join Date: Jun 2011
Location: scabs
Posts: 1,722
Default

On a serious note an upright according to the clever people should have zero kingpin inc. and produce zero scrub . that leaves just caster for self centering. Well the first two cant be done easily so the whole thing becomes a compromise. From the notes I have been reading if you require 5 deg. of caster you should have double that figure for kpi. So even if someone makes a special upright it will still be a compromise. To achieve any more adjustable parameters other than camber all that is needed is a fully adjustable top wishbone. There are loads of uprights out there that are suitable that tick enough boxes if you do a bit of research.

Bob

================... KPI ......... caster

Lotus Elise........................ 12° ......... 3.8° caster
Corvette C5, C6................. 8.8° ...... 6.5° caster
Pinto/MustangII/Wilwood... 11°
Ferrari 512BB............... 9 or 13°
ATS AFX Tall..................... 8°
Triumph Spitfire................ 7° ..........4.7° caster
Lotus Seven..................... 9° .......... 5° caster
Mazda Miata................... 11.3° ........ 5° caster
Ferrari F355................... 13.16°
McLaren F1...................... 9° ........... 6° caster ...... 16.25mm scrub

Dont know how much more toblerone I can eat
__________________
When The Results Disagree With The Theory: Believe The Results And Invent A New Theory
If I had two brains I,d still be a halfwit

The cave http://s1116.photobucket.com/user/my...deshow/mancave

The build http://www.haynes.co.uk/forums/showthread.php?t=12669

Last edited by robo : 13th April 2012 at 12:28 AM.
Reply With Quote
  #32  
Old 13th April 2012, 10:01 AM
MarkB MarkB is offline
Senior Member
 
Join Date: May 2011
Location: naughty step most of the time
Posts: 494
Default

Strange, If I say anything remotely hinting that there are issues with how the suspension works I get slapped down and accused of having an attitude.

Read what you write, you are no more than pre school kids bitching over who is going to sit near teacher!!!

And Ronnie, I thought you were a moderator so meant to be unbiased or is that a case of pot calling the kettle black yet again?
As for that registered 7 you bought, I hope it's not the one that was for sale in Helston as that is a ringer and not legally registered as it uses a Dutton log book..

Heyo I can hear the Stukas firing up
Reply With Quote
  #33  
Old 13th April 2012, 11:33 AM
Bonzo's Avatar
Bonzo Bonzo is offline
Senior Member
 
Join Date: Jul 2007
Location: Cornwall
Posts: 3,321
Default

Quote:
Originally Posted by MarkB View Post
Strange, If I say anything remotely hinting that there are issues with how the suspension works I get slapped down and accused of having an attitude.

Read what you write, you are no more than pre school kids bitching over who is going to sit near teacher!!!

And Ronnie, I thought you were a moderator so meant to be unbiased or is that a case of pot calling the kettle black yet again?
As for that registered 7 you bought, I hope it's not the one that was for sale in Helston as that is a ringer and not legally registered as it uses a Dutton log book..

Heyo I can hear the Stukas firing up
Mark

Sorry if my post offended you mate

Long story short, I was bored & was just having a little fun

True I am a moderator but there was nothing in the job decription about not being allowed to have a sense of humour or irony !!

As for my new project mate " Wouldn't you just love to know "

Sorry, you'll just have to wait till you spot it on the road.

Will be real easy to spot, bright Red 7 & I will be the one driving with my head held high

Edited to add

Anyhow, this thread is getting a little off topic so back to the original question.

How are you getting on with the fabricated uprights & is there any news on when they will be hitting the market ?
__________________
I am not a complete idiot...........Some of the parts are missing !!
Ronnie

www.roadster-builders.co.uk

Last edited by Bonzo : 13th April 2012 at 12:42 PM.
Reply With Quote
  #34  
Old 13th April 2012, 01:53 PM
ayjay ayjay is offline
Senior Member
 
Join Date: Dec 2010
Location: Coedpoeth near Wrexham, North Wales
Posts: 737
Default

I will be the one driving with my head held high



Make sure its below the roll bar
Reply With Quote
  #35  
Old 13th April 2012, 02:46 PM
ozzy1's Avatar
ozzy1 ozzy1 is offline
Senior Member
 
Join Date: Jul 2009
Location: perth,australia
Posts: 760
Default

On the line of uprights found an excellent site with lots of cad pics and a lot of stuff with the haynes roadster in mind.Dont know if its been posted before but its very good.

http://www.super7thheaven.co.uk/
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 08:34 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.