CP3 and CP4

[CarlW]

Hi guys, I have marked up plates CP3 and CP4 to how the shock bracket and nuts will be welded according to the Appendix.
I then checked this agains the dimentions of the brackets on page 49.
Is page 43 wrong as it shows CP3 on left and CP4 on right ware if you look at the mounting dimention, I also have it 3D CAD, these two are mixed up. CP4 should be on the left and CP3 on the right????

Take for instance CP3. The shock bracket is located towards the that the holes have the short dimention from. Looking from the bottom, bracket on left.
If you fit this to the left side, this would put the shortest distance to holes and to bracket to the forward position. This means the dimention from the edge of the top rail to the centre of the bracket to be 28mm where on page 49 its 72mm.

Cheers!