#1
|
|||
|
|||
Does this look right to you?
This looks like its for a FWD application to me, or am I being thick?
Cheers Adrian http://cgi.ebay.co.uk/FORD-1-8-2-0-Z...item41501ddc69 |
#2
|
||||
|
||||
Yup! Defo a FWD fanimold. Could possibly be altered/adapted to suit a RWD layout but looks like more work than making one from scratch.
D.
__________________
visit my website at www.cossie.davenewell.co.uk |
#3
|
||||
|
||||
I thought most FWD Fords exhausted at the front of the engine and curved back under..
That looks uselsess in any application. TT
__________________
You only get a woosh with a dump valve Build Thread Man Cave Mantiques Cecil Street Auto Repairs Garage Carlisle Build Cost £4181.65 - Last - Wheel Cylinders |
#4
|
||||
|
||||
Quote:
D.
__________________
visit my website at www.cossie.davenewell.co.uk |
#5
|
||||
|
||||
Probably Yamahhhha As they did a few engines with ford
TT
__________________
You only get a woosh with a dump valve Build Thread Man Cave Mantiques Cecil Street Auto Repairs Garage Carlisle Build Cost £4181.65 - Last - Wheel Cylinders |
#6
|
||||
|
||||
Yep, AFAIK Yamaha helped Ford during the development of the Zeta (Zetec E) engine, and Sigma (Zetec S) is a Yamaha design throughout.
__________________
Albert Haynes Roadster FAQ | Haynes Builder Locations Gallery, build thread in Lithuanian / via Google Translate. |
#7
|
||||
|
||||
Are we looking at the same item.......
Wish i'd seen this a year ago, it looks ideal for the roadster Zetec exiting straight out the side of the engine bay - height and offset from engine looks about right to. And for £75 in s/s is bloody good value to. Anyone fitting Zetec then grab his hand off. But yes you're right the stock manifolds exit from the front and tuck underneath. The stock Focus ST170 is a good full flow exhaust to use with the bottom section 2-1 shortened and turned to exit to the side of the roadster. You won't get one that cheap though. Regards....AndyH Forgot to say, will also fit a cvh to.....
__________________
Haynes Roadster / Saturn GRP Bodywork. Now available direct through http://www.gillhamonline.co.uk/ or contact me direct on andrew.hugill@ntlworld.com Regards..........AndyH |
#8
|
||||
|
||||
That ebay jobbie on a zetec will indeed punch straight out the side of a roadster. Although it looks a bit long to be honest, may stick out to far.
I may dig that ST manifold out and see how much its worth... Actually, just found this.... http://cgi.ebay.co.uk/FORD-FOCUS-ST1...item3a5b919cce Last edited by Coozer : 9th June 2010 at 09:59 AM. |
#9
|
||||
|
||||
Yes it maybe close Steve, just measured and you have 320mm from the centre of the flange to the side panel just where you would need to fit a bend.
Maybe worth asking the question for distance to outlet. AndyH
__________________
Haynes Roadster / Saturn GRP Bodywork. Now available direct through http://www.gillhamonline.co.uk/ or contact me direct on andrew.hugill@ntlworld.com Regards..........AndyH |
#10
|
|||
|
|||
Looks like Zetec E to me judging by the bolt patern.
Guess it's designed to come out the side panel then turn down the side to the muffler. BV. |
Thread Tools | |
Display Modes | |
|
|