|
|
#1
19th July 2013, 08:42 AM
|
||||
|
||||
playing with grp and filler
I've been playing with the instrument binnacle from the mx5 dash I've added an upswept lip to the rear, taken a mould so I had two the same and come up with this bubble areo screen. Problem is I've been told it looks too much like a pair of boobs stuck on top of the scuttle. What do ya think, add nipples or not?
    I'm not sure if I should fill the backs of them in or not I'll see what it looks like once it's in primer and maybe even some black paint. As a side note:There now follows a post from Ben Copeland telling us about the current deals from Equinox....
__________________
Website http://www.talonmotorfabrication.co.uk/ Direct email phil@talonmotorfabrication.co.uk talonmotorfabrication@gmail.com Mobile office hours 07514098334 Last edited by Talonmotorsport : 19th July 2013 at 09:03 AM. 
|
|
#3
19th July 2013, 09:26 AM
|
|||
|
|||
|
As a side note:There now follows a post from Ben Copeland telling us about the current deals from Equinox....[/quote]
Thank gawd I'm not the only one who's noticed!  Looks good to me Phil, could make one of those bra things that the VW boys use on their bonnets 
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
